Abstract:Ternary metal carbide TiAlC has been proposed as a metal gate material in logic semiconductor devices. It is a hard-to-etch material due to the low volatility of the etch byproducts. Here, a simple, highly controllable, and dry etching method for TiAlC has been first presented using nonhalogen N2/H2 plasmas at low pressure (several Pa) and 20 °C. A capacitively coupled plasma etcher was used to generate N2/H2 plasmas containing active species, such as N, NH, and H to modify the metal carbide surface. The etch rate of TiAlC was obtained at 3 nm/min by using the N2/H2 plasma, whereas no etching occurred with pure N2 plasma or pure H2 plasma under the same conditions. The surface roughness of the TiAlC film etched by N2/H2 plasma was controlled at the atomic level. A smooth etched surface was achieved with a root-mean-square roughness of 0.40 nm, comparable to the initial roughness of 0.44 nm. The plasma properties of the N2/H2 plasmas were diagnosed by using a high-resolution optical emission spectrometer, detecting the NH molecular line at 336 nm. The etching behavior and plasma-surface reaction between N2/H2 plasma and TiAlC were investigated by using in situ spectroscopic ellipsometry, in situ attenuated total reflectance-Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. The findings indicate that the N-H, C-N, and Ti(Al)-N bonds form on the TiAlC surface etched by the N2/H2 plasmas. The mechanism for etching of TiAlC involving transformation reactions between inorganic materials (metal carbides) and inorganic etchants (N2/H2 plasma) to form volatile organic compounds such as methylated, methyl-aminated, and aminated metals is proposed. Nonhalogen or nonorganic compound etchants were used during the etching process. The study provides useful insights into microfabrication for large-scale integrated circuits.

The Dry Etching of TiN Thin Films Using Inductively Coupled CF4/Ar Plasma

Dry Etching Characteristics of TiN Thin Films in BCl 3 /He Inductively Coupled Plasma

Dry-etching properties of TiN for metal/high-k gate stack using BCl3-based inductively coupled plasma

Etching Characteristics and Mechanisms of TiO2 Thin Films in HBr/Ar and Cl2/Ar Inductively-Coupled Plasmas

Dry Etching of TaN/HfO2 Gate Stack Structure by Cl2/SF6/Ar Inductively Coupled Plasma

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Influence of Flow Rates and Flow Times of Plasma-Enhanced Atomic Layer Deposition Purge Gas on TiN Thin Film Properties

Study on the Electrical and Optical Properties of Vanadium Doped TiN Thin Films Prepared by Atmospheric Pressure Chemical Vapor

The effect of NH3 plasma pulse time on atomic layer-deposited TiN films using tetrakis-(dimethylamino) titanium as a metal precursor

Isotropic plasma-thermal atomic layer etching of superconducting TiN films using sequential exposures of molecular oxygen and SF$_6/$H$_2$ plasma

Investigation of microstructure evolution in Pt-doped TiO2 thin films deposited by rf magnetron sputtering

Nonhalogen Dry Etching of Metal Carbide TiAlC by Low-Pressure N2/H2 Plasma at Room Temperature

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Room Temperature Deposition of Titanium Carbide Thin Films Using Dense Plasma Focus Device

The Effect of Deposition Temperature of TiN Thin Film Deposition Using Thermal Atomic Layer Deposition

Production of High-Power Nitrogen Sputtering Plasma for TiN Film Preparation

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Low Temperature Deposition of TiN Using Tetrakis(dimethylamido)‐Titanium in an Electron Cyclotron Resonance Plasma Process

Dry Etching Performance and Gas-Phase Parameters of C6F12O + Ar Plasma in Comparison with CF4 + Ar

The Deposition of Superconducting TiN Thin Film by Using DC Magnetron Sputtering

Investigation on the Performance of TiN Coatings by Reactive Plasma Spraying Crystallization