Abstract:This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N2 gas, ion energy (Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300 K). At the optimum partial pressure of N2 gas, samples were prepared with or without Ti interface at Ei = 1.0 or 0.5 keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1 nm, when deposited at the lower Ei of 0.5 keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80(<math>±</math>0.03) g cm−3, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in Ei from 1.0 to 0.5 keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in Ei has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (<math><</math>Esp>) leaving the target at Ei = 0.5 keV is the optimum value favoring the growth of defects free homogeneously distributed films. Secondary ion mass spectroscopy depth profile measurements confirm the uniform distribution of N and Ti across the depth of a sample. The electronic structure of samples was probed using N K-edge and Ti L-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of <math><</math>Esp> and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Formation Of Nanocrystalline Tin Film By Ion-Beam-Enhanced Deposition

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Nanocrystalline Titanium Nitride Films Prepared by Electrophoretic Deposition

Microstructural and Electrical Resistivity of TiN Electrode Films Prepared by Direct Current (DC) Reactive Magnetron Sputtering

Properties and morphology of TiN films deposited by atomic layer deposition

Synthesis and study of highly dense and smooth TiN thin films

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Thickness uniformity, electrical properties, and stress of sputtered TiN thin films

Nanohardness of nanocrystalline TiN thin films

Mechanical properties of TiN thin film coatings on 304 stainless steel substrates

The microstructure and mechanical properties of Ti(CoCr)N films produced by DC magnetron sputtering

Surface analysis on vacuum arc deposited TiN film

Film thickness effect on texture and residual stress sign transition in sputtered TiN thin films

Low Temperature Deposition of TiN Using Tetrakis(dimethylamido)‐Titanium in an Electron Cyclotron Resonance Plasma Process

The Effects of Ion Bombarding Energy on the Structure and Properties of TiN Films Synthesized by Dual Ion Beam Sputtering

Investigation on the Performance of TiN Coatings by Reactive Plasma Spraying Crystallization

The Deposition of Superconducting TiN Thin Film by Using DC Magnetron Sputtering

Investigation of TiC films synthesized by low energy ion bombardment

Microstructure, Surface Morphology, and Mechanical Properties of Nanocrystalline Tin/Amorphous Si3n4 Composite Films Synthesized by Ion Beam Assisted Deposition