Abstract:This study aims towards a systematic reciprocity of the tunable synthesis parameters - partial pressure of N2 gas, ion energy (Ei) and Ti interface in TiN thin film samples deposited using ion beam sputtering at ambient temperature (300 K). At the optimum partial pressure of N2 gas, samples were prepared with or without Ti interface at Ei = 1.0 or 0.5 keV. They were characterized using x-ray reflectivity (XRR) to deduce thickness, roughness and density. The roughness of TiN thin films was found to be below 1 nm, when deposited at the lower Ei of 0.5 keV and when interfaced with a layer of Ti. Under these conditions, the density of TiN sample reaches to 5.80(<math>±</math>0.03) g cm−3, a value highest hitherto for any TiN sample. X-ray diffraction and electrical resistivity measurements were performed. It was found that the cumulative effect of the reduction in Ei from 1.0 to 0.5 keV and the addition of Ti interface favors (111) oriented growth leading to dense and smooth TiN films and a substantial reduction in the electrical resistivity. The reduction in Ei has been attributed to the surface kinetics mechanism (simulated using SRIM) where the available energy of the sputtered species (<math><</math>Esp>) leaving the target at Ei = 0.5 keV is the optimum value favoring the growth of defects free homogeneously distributed films. Secondary ion mass spectroscopy depth profile measurements confirm the uniform distribution of N and Ti across the depth of a sample. The electronic structure of samples was probed using N K-edge and Ti L-edge absorption spectroscopy and the information about the crystal field and spin-orbit splitting confirmed TiN phase formation. In essence, through this work, we demonstrate the role of <math><</math>Esp> and Ti interface in achieving highly dense and smooth TiN thin films with low resistivity without the need of a high temperature or substrate biasing during the thin film deposition process.

Low Temperature Deposition of TiN Using Tetrakis(dimethylamido)‐Titanium in an Electron Cyclotron Resonance Plasma Process

Highly-Conformal TiN Thin Films Grown by Thermal and Plasma-Enhanced Atomic Layer Deposition

The effect of NH3 plasma pulse time on atomic layer-deposited TiN films using tetrakis-(dimethylamino) titanium as a metal precursor

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

The Effect of Deposition Temperature of TiN Thin Film Deposition Using Thermal Atomic Layer Deposition

Properties and morphology of TiN films deposited by atomic layer deposition

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Synthesis and study of highly dense and smooth TiN thin films

Structural and Hydrophilic Properties of TiN Films Prepared by Ultrasonic Atomization Assisted Spray Method under Low Temperature

Room Temperature Deposition of Titanium Carbide Thin Films Using Dense Plasma Focus Device

TiN Films Deposited by Laser CVD: A Growth Kinetics Study

Plasma Spray Deposition Enhancement of Titanium Nitride Layer Using Nitrogen-Contained Plasma Irradiation of Titanium Substrate as a Pre-spraying Method

Microstructural and Electrical Resistivity of TiN Electrode Films Prepared by Direct Current (DC) Reactive Magnetron Sputtering

Composition and Texture of TiN Thin Films Fabricated by ECR Enhanced Sputtering Deposition

Properties of TiN films deposited by atomic layer deposition for through silicon via applications

Electrical and optical properties of titanium nitride coatings prepared by atmospheric pressure chemical vapor deposition

Nanocrystalline Titanium Nitride Films Prepared by Electrophoretic Deposition

Plasma-enhanced atomic layer deposition of titanium nitride for superconducting devices

Superconducting TiN films grown by directional reactive evaporation

Characteristics of TiN thin films grown by ALD using TiCl4 and NH3

Production of High-Power Nitrogen Sputtering Plasma for TiN Film Preparation