Abstract:Ternary metal carbide TiAlC has been proposed as a metal gate material in logic semiconductor devices. It is a hard-to-etch material due to the low volatility of the etch byproducts. Here, a simple, highly controllable, and dry etching method for TiAlC has been first presented using nonhalogen N2/H2 plasmas at low pressure (several Pa) and 20 °C. A capacitively coupled plasma etcher was used to generate N2/H2 plasmas containing active species, such as N, NH, and H to modify the metal carbide surface. The etch rate of TiAlC was obtained at 3 nm/min by using the N2/H2 plasma, whereas no etching occurred with pure N2 plasma or pure H2 plasma under the same conditions. The surface roughness of the TiAlC film etched by N2/H2 plasma was controlled at the atomic level. A smooth etched surface was achieved with a root-mean-square roughness of 0.40 nm, comparable to the initial roughness of 0.44 nm. The plasma properties of the N2/H2 plasmas were diagnosed by using a high-resolution optical emission spectrometer, detecting the NH molecular line at 336 nm. The etching behavior and plasma-surface reaction between N2/H2 plasma and TiAlC were investigated by using in situ spectroscopic ellipsometry, in situ attenuated total reflectance-Fourier transform infrared spectrometry, and X-ray photoelectron spectroscopy. The findings indicate that the N-H, C-N, and Ti(Al)-N bonds form on the TiAlC surface etched by the N2/H2 plasmas. The mechanism for etching of TiAlC involving transformation reactions between inorganic materials (metal carbides) and inorganic etchants (N2/H2 plasma) to form volatile organic compounds such as methylated, methyl-aminated, and aminated metals is proposed. Nonhalogen or nonorganic compound etchants were used during the etching process. The study provides useful insights into microfabrication for large-scale integrated circuits.

Dry-etching properties of TiN for metal/high-k gate stack using BCl3-based inductively coupled plasma

Dry Etching Characteristics of TiN Thin Films in BCl 3 /He Inductively Coupled Plasma

The Dry Etching of TiN Thin Films Using Inductively Coupled CF4/Ar Plasma

Dry Etching of TaN/HfO2 Gate Stack Structure by Cl2/SF6/Ar Inductively Coupled Plasma

Microstructure Optimization and Optical and Interfacial Properties Modulation of Sputtering-Derived Hfo2 Thin Films by Tio2 Incorporation

Etching Characteristics and Mechanisms of TiO2 Thin Films in HBr/Ar and Cl2/Ar Inductively-Coupled Plasmas

Nonhalogen Dry Etching of Metal Carbide TiAlC by Low-Pressure N2/H2 Plasma at Room Temperature

Nonhalogen Dry Etching of Metal Carbide TiAlC by Low-Pressure N 2 /H 2 Plasma at Room Temperature

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Temperature Dependence on Dry Etching of Hafnium Oxide Using an Inductively Coupled Plasma

The Effect of Deposition Temperature of TiN Thin Film Deposition Using Thermal Atomic Layer Deposition

Plasma etching and surface characteristics depending on the crystallinity of the BaTiO3 thin film

Isotropic plasma-thermal atomic layer etching of superconducting TiN films using sequential exposures of molecular oxygen and SF$_6/$H$_2$ plasma

Influence of Substrate Bias on Properties of TiN Films with X-ray Photoelectron Spectroscopy and Atomic Force Microscopy Studies

Influence of Substrate and Ar/N 2 Gas Flow Ratio on Structural, Optical and Electrical Properties of TiN Thin Films Synthetized by DC Magnetron Sputtering

Smooth Etching of Epitaxially Grown AlN Film by Cl2/BCl3/Ar-based Inductively Coupled Plasma

Study on the Electrical and Optical Properties of Vanadium Doped TiN Thin Films Prepared by Atmospheric Pressure Chemical Vapor

Properties of TiN films deposited by atomic layer deposition for through silicon via applications

Low Temperature Deposition of TiN Using Tetrakis(dimethylamido)‐Titanium in an Electron Cyclotron Resonance Plasma Process

Nonselective Etching of GaN/AlGaN Heterostructures by Cl2/Ar/BCl3 Inductively Coupled Plasmas

Quantum Chemical Study of the Initial Surface Reactions in Atomic Layer Deposition of TiN on the SiO(2) Surface.