Smooth Etching of Epitaxially Grown AlN Film by Cl2/BCl3/Ar-based Inductively Coupled Plasma

Xianwen Liu,Changzheng Sun,Bing Xiong,Lang Niu,Zhibiao Hao,Yanjun Han,Yi Luo
DOI: https://doi.org/10.1016/j.vacuum.2015.03.030
IF: 4
2015-01-01
Vacuum
Abstract:Inductively coupled plasma dry etching of epitaxially grown aluminum nitride (AlN) film using Cl-2/BCl3/Ar mixture has been investigated. The etch rate of AlN increases significantly with the addition of BCl3, and an etch rate as high as 258 nm/min has been demonstrated. High selectivity of AlN over Ni mask has been realized, and the etch rate of Ni is almost zero for lower bias voltage. By optimizing the etching parameters, grain formation due to crystallographic orientation dependent etching has been suppressed, and smooth etched surfaces and nearly vertical sidewalls are obtained. The root-mean-square roughness of the etched surface is measured to be 0.77 nm, which is almost the same as that of the as-grown surface. These results are suitable for the fabrication of low-loss AlN waveguides and optoelectronic devices. (C) 2015 Elsevier Ltd. All rights reserved.
What problem does this paper attempt to address?