Abstract:AlN thin films with c-axis orientation have been investigated for fabricating thin film bulk acoustic wave resonators in the past few years. Characterization of thin film material properties including density, elastic modulus, and piezoelectric coefficient is essential in processing study and for predicting the performance of the acoustic devices. In this paper, we present our results on the fabrication of highly c-axis oriented AlN thin films on Pt∕Ti∕Si (100) substrates by dc reactive magnetron sputtering method. The crystalline structure and the surface morphology of AlN films are characterized by x-ray diffraction and scanning electron microscopy. The effective piezoelectric coefficient d33eff of the AlN films was measured by a laser interferometer method and the piezoelectric coefficient d33 was estimated. A recently developed resonance spectrum method is applied to characterize the electromechanical properties of AlN thin films based on the input electrical impedance equation derived by one-dimensional transmission line theory for composite resonators. Using the experimental impedance spectrum data, the density and elastic constant of the piezoelectric AlN thin film in the four-layer composite resonator structure are evaluated. The calculated results reveal that the piezoelectric coefficient d33, density, and velocity of the c-axis oriented AlN thin film are 4.19pm∕V, 3187.3kg∕m3, and 10631m∕s, respectively.

Preparation of Aln Thin Films for Film Bulk Acoustic Resonator Application by Radio Frequency Sputtering

Sputtering Growth of Preferential C-Axis-oriented Aluminum Nitride Film Using Homogeneous Buffer Layer

Study of preparation of AlN Thin Films for FBAR Application by RF Sputtering

Growth of AIN Films by RF Reactive Magnetron Sputtering for Film-Bulk-Acoustic-Wave-Resonator Fabrication

Preparation of AIN Thin Film by DC Sputtering on SiO2/Si and Analysis of Microstructure

Preparation Technique Of Aln Piezoelectric Thin Film

Influence of Substrate Temperature on Structural Properties and Deposition Rate of AlN Thin Film Deposited by Reactive Magnetron Sputtering

Growth of C-Axis Oriented Aln Thin Films on Titanium Alloy Substrate by Middle Frequency Magnetron Sputtering

High Quality AlN Thin Films Deposited by Middle-Frequency Magnetron Sputtering at Room Temperature

Preparation and Properties of C-axis Preferred Orientation AlN Thin Films by Pure Nitrogen Reactive Sputtering

Review on Deposition of C-Axis Oriented AlN Films by Reactive Magnetron Sputtering

High Potential Columnar Nanocrystalline AlN Films Deposited by RF Reactive Magnetron Sputtering

AlN Thin Films Deposited on Different Si-based Substrates Through RF Magnetron Sputtering

Preparation of Preferentially Orientated AlN Thin Films by DC Magnetron Sputtering

Low temperature growth of c-axis oriented AlN films on γ-LiAlO2 by radio frequency magnetron sputtering

Active Feedback Control of Reactive Sputtering AlN Thin Film Fro FBAR

Property Characterization of Aln Thin Films in Composite Resonator Structure

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive direct-current magnetron sputtering

Deposition of c-axis orientation aluminum nitride films on flexible polymer substrates by reactive DC magnetron sputtering

The Preparation of Scaln(002) Alloy Thin Films Deposited on Si(100) Substrates by Dc Reactive Magnetron Sputtering

Study on c-axis orientation of AlN thin film on the influence Al buffer layer and Ar/N2 gas flow ratio in reactive magnetron sputtering