Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

AC Loss and Contact Resistance In Copper-Stabilized Nb3Al Rutherford Cables with and without a Stainless Steel Core

Almost Kahler 4-manifolds with J-invariant Ricci tensor and special Weyl tensor

Control of contact resistance by strand surface coating in 36-strand NbTi CICCs

Nb3Sn wire shape and cross sectional area inhomogeneity in Rutherford cables

Electrical Contact Resistance in REBCO Stacks and Cables With Modified Surfaces

Rutherford MgB2 cable with resistive NbTi barriers and CuNi30 sheath.

Deformation Behavior and Degradation on Rutherford Cabling of Nb 3 Sn Wires

Training performance of Nb3Sn Rutherford cables in a channel with a wide range of impregnation materials

Determination of the electromechanical limits of high-performance Nb$_3$Sn Rutherford cables under transverse stress from a single-wire experiment

Analysis of AC Transport Loss in Conductor on Round Core Cables

AC loss, interstrand resistance and mechanical properties of prototype EU DEMO TF conductors up to 30 000 load cycles

Internal Strain Measurement by Neutron Diffraction Under Transverse Compressive Stress for Nb 3 Sn Wires With and Without Cu-Nb Reinforcement

Temperature- and field-dependent characterization of a conductor on round core cable

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Numerical Investigation on Transverse Heat Transfer Properties in Cross Section of Full Size Nb3Sn CICC ITER Conductor

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Simulation of Rutherford Cable AC Loss and Magnetization with the Coupled Axial and Transverse Currents Method

Overview of verification tests on AC loss, contact resistance and mechanical properties of ITER conductors with transverse loading up to 30 000 cycles

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer

A Novel Aluminum-Stabilized Stacked REBCO Tape Cable