Abstract:For an accurate estimation of the AC losses of superconducting triaxial cables, we present a 2D model capable to provide a global assessment of multi-layer triaxial cables, validated against the AC-losses on single-phase cables provided by the VNIIKP Cable Institute. Four models are presented, the first being a single-phase cable of 50 tapes and the others being three triaxial cables made of up to 135 coated conductors distributed in up to 9 layers. A systematic study is devised, where the number of layers per phase increases from 1 to 3, with at least 14 tapes distributed across each layer of the first (innermost) phase, 15 in the secondary (middle) phase, and 16 in the third (outermost) phase, respectively. Remarkably, our results reveal that the simple strategy of considering an unbalanced distribution for the amplitudes of the applied current, can generally balance the magnetic field between the three phases even for the bilayer and trilayer cables, resulting in negligible magnetic leaks in all situations. Besides, our simulations allow to see for the first time how the transport and magnetization currents distribute across the thickness of all the superconducting tapes, from which we have found that the AC-losses of the 2nd phase is generally higher than at the other phases at low to moderate transport currents Itr < 0.8 Ic. Nevertheless, depending on whether the Ic of the SC tapes at the 3rd phase layers is lower than the one at the 2nd phase, the layers at the third phase can exhibit a considerable increment on the AC losses, as result of the considered magneto angular anisotropy of the HTS tapes, which lead to intriguing electromagnetic features that suggest a practical threshold for the applied transport current, being it 0.8 Ic. Likewise, the relative change in the AC-losses per adding layers, per phase, and as a function of the applied current is disclosed.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to evaluate the AC loss of multi - layer three - axis cables with high precision and provide a global evaluation model. Specifically, the authors proposed a two - dimensional model, which can comprehensively evaluate multi - layer three - axis cables, and verified the validity of this model by comparing it with the AC loss measurement results of single - phase cables provided by VNIIKP Cable Research Institute. The research mainly focuses on the following aspects: 1. **Influence of multi - layer structure**: The influence of increasing the number of layers per phase on the local electromagnetic characteristics of the cable (such as current density and magnetic field intensity), and the influence of these changes on the AC loss estimation were studied. 2. **Unbalanced current distribution strategy**: An unbalanced current distribution strategy was proposed, that is, applying currents of different amplitudes in different phases to balance the magnetic fields among the three phases and reduce magnetic leakage. It was found that this strategy can effectively reduce magnetic leakage even in double - layer and triple - layer cables. 3. **Current distribution and magnetization current**: Through high - resolution simulation, the distribution of transport current and magnetization current on all superconducting strip thicknesses was shown for the first time, revealing that the AC loss of the second phase is usually higher than that of other phases under low - to - medium transport current \(I_{\text{tr}}<0.8I_c\). 4. **Change of critical current density**: The relative changes of the critical current density \(I_c\) of different layers and phases were analyzed. In particular, when the critical current density of the third phase is lower than that of the second phase, the AC loss of the third phase will increase significantly. This is attributed to the magnetic - angle anisotropy of the superconducting strip, which leads to some interesting electromagnetic characteristics, and a practical transport current threshold of \(0.8I_c\) is suggested. In general, this paper aims to provide scientific basis and technical support for the design and optimization of multi - layer three - axis cables through detailed electromagnetic evaluation and AC loss analysis.

Electromagnetic Assessment and AC Losses of Triaxial Cables with Multiple 2G-HTS Layers Per Phase

Practical Forecasting of AC Losses in Multi-layer 2G-HTS Cold Dielectric Conductors

Computational Modelling of Russia's First 2G-HTS Triaxial Cable

Analysis of AC Transport Loss in Conductor on Round Core Cables

Sheath Loss Calculation and Loss Reduction Analysis of 220 Kv Cable System

Effect of Multilayer Configuration on Ac Losses of Superconducting Power Transmission Cables Consisting of Narrow Coated Conductors

Investigation on Circulation Current Calculation and Grounding Methods of Multi-circuit Cables

Flux-transfer losses in helically wound superconducting power cables

AC losses in HTS sector shaped high-current conductors for fusion coils

J model for studying AC magnetization loss in 3D cable structures

Simulation of Rutherford Cable AC Loss and Magnetization with the Coupled Axial and Transverse Currents Method

Investigation of AC Loss in HTS Cross-Conductor Cables for Electrical Power Transmission

Estimation of Self-Field Critical Current and Transport-Magnetization AC Losses of Roebel Cables

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Electromagnetic characterization of high-temperature superconducting cables with partial tape faults

Study on the Current Distribution and Structural Optimization of a High-Temperature Superconducting AC Power Cable

Understanding and minimizing ac losses in CORC cables of YBCO superconducting tapes

Calculation and Measurement of Transport AC Loss of Re BCO CORC Cables for Electric Aircraft

Numerical Investigation of Critical Current and Magnetization Loss Effect for Twisted Stacked Tape Cable Considering Field-Angle Dependency and Mechanical Torsion Degradation

Mathematical Modeling and Current Characteristics Investigation of a 35 Kv Three-in-One High Temperature Superconducting (HTS) Power Cable

Computation of Losses in HTS Under the Action of Varying Magnetic Fields and Currents