Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

Temperature- and field-dependent characterization of a conductor on round core cable

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

CORC ® wires allowing bending to 20 mm radius with 97.5 % retention in critical current and having an engineering current density of 530 A/mm 2 at 20 T

Critical Current Measurement of REBCO Cables by Using a Superconducting Transformer

Mechanical Response of Conductor on Round Core (CORC) Cables Under Electromagnetic Force

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

High-field thermal transport properties of REBCO coated conductors

Electromechanical behaviour of REBCO coated conductor toroidal field coils for ultra-high-field magnetic-confinement plasma devices

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Critical Current Correlations and Regressions Across the Superconducting Parameter Space of REBCO Wires, B||c

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

Fundamental study on performances of fiber-superconducting composite CORC cable: Electromagnetic, thermal, mechanical and quench behaviors

Field and temperature scaling of the critical current density in commercial REBCO coated conductors

Analysis of AC Transport Loss in Conductor on Round Core Cables

Magnetic Field and Temperature Scaling of the Critical Current of REBCO Tapes

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

REBCO tapes for applications in ultra-high fields: critical current surface and scaling relations

3D quench modeling based on T-A formulation for high temperature superconductor CORC cables

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

A 6-around-1 cable using high-temperature superconducting STAR ® wires for magnet applications

International Round-Robin Test of Critical Current of Superconducting Cable Sample