Abstract:High-temperature superconductor (Re)Ba2Cu3Ox (ReBCO) conductor on round core cable (CORC®) has a large current carrying capacity for high field magnets. Lorentz forces acting on CORC conductors, cause a reduction of the critical current, or even permanent degradation of their performance when exceeding critical values. Transverse compressive stress is one of the principal mechanical stresses when CORC cables are bundled to CICC conductors capable of operating at currents up to 100 kA in magnetic fields of up to 20 T. In this research, a mechanical-electromagnetic model is developed to study the effect of transverse compressive loads on the electromagnetic performance of CORC cables. A mechanical transverse load on the cable is implemented to simulate the electromagnetic force. A comparison of numerical simulations with experiments for a three-layer CORC cable is first performed to validate the model's reliability, with particular attention to critical current reduction during the transverse compression process. A novel feature of this paper is that the model developed can analyze both mechanical response under transverse compressive loads and electromagnetic performance under applied AC magnetic fields with low amplitudes. On this basis, the model investigates the effects of winding parameters on the axial strain and critical current reduction of the ReBCO layer in a single-layer CORC cable. The numerical analysis shows that increasing the winding angle can reduce the axial strain and critical current reduction of the ReBCO layer in the contact area. Subsequently, a detailed comparative study is carried out studying the axial strain of the ReBCO layer in the non-contact area with and without taking the winding core into account. In addition, a sudden increase of the magnetization loss is explained when the transverse compressive load reaches a certain level. Finally, a six-layer CORC cable's electromagnetic analysis is performed, and each tape layer's critical current reduction is investigated and discussed. The comparison of magnetization loss and current density between six- and single-layer CORC cables in the no-strain case is also given. This FE model can guide optimizing a cable design for specific application conditions.

3D quench modeling based on T-A formulation for high temperature superconductor CORC cables

Real‐time Calculation of Three Core Cable Conductor Temperature Based on Thermal Circuit Model with Thermal Resistance Correction

Fundamental study on performances of fiber-superconducting composite CORC cable: Electromagnetic, thermal, mechanical and quench behaviors

Effect of different core diameters on the current-carrying performance of CORC cables with REBCO multi-filamentary tapes

Thermal-hydraulic Analysis on Quench Behavior of Indium-Tin Soldered REBCO Composite Conductor

Analysis of AC Transport Loss in Conductor on Round Core Cables

Two Quenched Models for High-Temperature Superconducting Insulated Coils

Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables

Performance study of REBCO multi-filament tapes/ CORC cables prepared by reel-to-reel mechanical incision

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

Numerical study on the transport current distribution in the multi-layer CORC coil

Understanding and minimizing ac losses in CORC cables of YBCO superconducting tapes

Current Sharing in Superconducting REBCO Cables-FEM Modeling

An Equivalent Cross-Section Model for CORC Cable to Achieve Accurate AC Loss Estimations

Design Study on a 100-Ka/20-k HTS Cable for Fusion Magnets

3D FEM Modelling of CORC Commercial Cables with Bean's like magnetization currents and its AC-Losses Behaviour

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Bending Characteristics of a Transposed Cable (xcable) with In-Plane Bending of REBCO Tapes

A newly developed 10kA-level HTS conductor: innovative tenon-mortise-based modularized conductor (TMMC) based on China ancient architecture

Influence of HTS tape arrangement on the transverse compression performance of copper former CORC cables