Abstract:Within the framework of magnetic confinement fusion, several projects worldwide are demonstrating the possibility of integrating high-temperature superconductors (HTS) in the coil systems. HTS-based technologies are highly attractive for practical applications because they can extend the operating margins of fusion coils in terms of higher temperatures, transport currents and magnetic fields. Based on the results achieved with the twisted-stacked tape cable, we have designed a novel low-loss HTS sector cable-in-conduit conductor, with a target of 60 kA at 4.5 K, 18 T, which is presently of interest for the DEMO Central Solenoid coil. In HTS cables, the AC losses can represent a significant limiting factor, therefore they must be taken into consideration both in the design phase and in the assessment of the overall magnet thermal budget. In this work, to assess the loss behavior and to optimize the cable design, we have explored different aspect ratios and arrangements of the stacked tapes within the cable layout. The magnetization losses are calculated with a 2D finite-element model based on the T-A formulation and analytical approximations based on the Brandt-Halse critical state model. Specifically, we have developed an analytical formulation that allows for the calculation of the instantaneous power losses in HTS stacked cables with a limited number of tapes per stack, achieving sufficient accuracy at high fields. The analytical model enables a sufficiently accurate assessment of the heat deposited on the conductor during those particular instants of a plasma scenario where the variation of the field is very high, such as during the critical initial discharge period of the plasma initiation.

Design Study on a 100-Ka/20-k HTS Cable for Fusion Magnets

Research on Structure Optimization of Cold Dielectric High-Temperature Superconducting Cables

Preliminary Design Study on Non-Twisted HTS Conductor for Fusion Applications

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

AC losses in HTS sector shaped high-current conductors for fusion coils

Design of Cold Dielectric Hts Power Cable

Dynamic Experiment For The Magnetothermal Stability Of A 110 Kv/3 Ka Cold Dielectric High-Temperature Superconducting Cable With An Impact Of Fault Current In Power System

Design and Development of 16-Ka HTS Current Lead for HMFL 45-T Magnet

Magnetic-Thermal Coupling Analysis of the Cold Dielectric High Temperature Superconducting Cable

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Safety Analysis of the 100 Ka HTS Current Lead for CFETR

Transient Analysis of HVDC HTS Cable in Power Grid Using Discretized Electrical-Thermal Model

Design and analysis of a HTS internally cooled cable for the Muon Collider target and capture solenoid magnets

Temperature Analysis of HTS Cables in Superconducting DC Energy Pipeline During Short-circuit Fault

Design and Performance Tests of a Fault Current-Limiting-Type Tri-Axial HTS Cable Prototype

Modelling and analysis of quench in the 15-kA HTS conductor

Fault Analysis for 110 Kv HTS Power Cables

Characteristics of Aluminium-stabilized HTS Detector Magnet Cable at 4 K and 5 T