Abstract:Distribution characteristics of the current, ampere force and magnetic flux density (B [T]) of a novel high temperature superconducting (HTS) cable woven by transposed REBCO tapes under different transposition lengths are proposed, and these characteristics of the cable stacked with 3 REBCO tapes are also carried out in this paper for comparison. The objective is to enhance the current density and the compactness of the HTS tapes combination, and uniform the current, ampere force and magnetic flux density (B [T]) distributions. A 3D finite element model (FEM), based on Maxwell's equations without consideration of the displacement current, is established to describe the state of the system in the liquid nitrogen condition. The distributions characteristics, maximum and minimum values of current, ampere force and magnetic flux density (B [T]) show significant differences in the simulation results between the novel HTS cable woven by 3 transposed REBCO tapes and the cable stacked with 3 REBCO tapes. The simulated results show that the distribution characteristics are improved, with a more uniform distribution characteristic than that of the cable stacked with REBCO tapes. This is due to fully transposed REBCO tapes. In addition, the experimental E-I curve was also reached. The experimental results show that using a shorter transposition length in the cable can improve the critical current. However, A too small transposition length can cause significant damage to the HTS tape, resulting in deformation of the HTS tape and a reduction in the electromagnetic properties of the HTS tape. This affects the critical current of the HTS tape and, ultimately, the critical current of the cable. From the point of view of whether the production process is convenient, meets the requirements of economy and reduces costs, we need to find a suitable transposition length. The measured optimal transposition length is 95 mm for the cable woven by 3 REBCO tapes. Ethical Compliance: All procedures performed in studies involving human participants were in accordance with the ethical standards of the institutional and/or national research committee and with the 1964 Helsinki Declaration and its later amendments or comparable ethical standards.

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Experimental Studies of Critical Currents and Joint Resistance of HTS Twisted Stack Slotted-Core Cables

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Mechanical Behavior and Critical Current Density Variation of the Twisted Stacked-Tape Slotted-Core Cable-in-conduit Conductor under Bending and Axial Tensile Load

Current-Carrying Capability and Magnetic Behavior of the HTS Twisted Stacked-Tape Conductor Cable for the Compact Fusion Reactor

Performance Test of REBCO CICC Sub-Cables with 10 Ka Current under 20 T Background Field

Development of a novel transposed cable with in-plane bending of HTS tapes (X-cable)

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Bending Characteristics of a Transposed Cable (xcable) with In-Plane Bending of REBCO Tapes

A Novel Aluminum-Stabilized Stacked REBCO Tape Cable

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Manufacture and Test of Bi-2212 Cable-In-Conduit Conductor

A newly developed 10kA-level HTS conductor: innovative tenon-mortise-based modularized conductor (TMMC) based on China ancient architecture

Critical current characteristics and ampere force distribution of a novel HTS cable with different transposition lengths

Experimental Study on the Cabling Performance of REBCO Cable with Different Twist Pitches

Design and Test of a Compact Twisted Stacked YBCO Cable for Fusion Application

AC Loss and Contact Resistance in Highly Flexible Rebco Cable for Fusion Applications

Research on the Radial Crimping Process for Stacked High-Temperature Superconducting Cable-in-Conduit Conductor

Experimental and Numerical Study on the Magnetization Process of Roebel Cable Segments

Preliminary Design Study on Non-Twisted HTS Conductor for Fusion Applications