Abstract:Within the framework of magnetic confinement fusion, several projects worldwide are demonstrating the possibility of integrating high-temperature superconductors (HTS) in the coil systems. HTS-based technologies are highly attractive for practical applications because they can extend the operating margins of fusion coils in terms of higher temperatures, transport currents and magnetic fields. Based on the results achieved with the twisted-stacked tape cable, we have designed a novel low-loss HTS sector cable-in-conduit conductor, with a target of 60 kA at 4.5 K, 18 T, which is presently of interest for the DEMO Central Solenoid coil. In HTS cables, the AC losses can represent a significant limiting factor, therefore they must be taken into consideration both in the design phase and in the assessment of the overall magnet thermal budget. In this work, to assess the loss behavior and to optimize the cable design, we have explored different aspect ratios and arrangements of the stacked tapes within the cable layout. The magnetization losses are calculated with a 2D finite-element model based on the T-A formulation and analytical approximations based on the Brandt-Halse critical state model. Specifically, we have developed an analytical formulation that allows for the calculation of the instantaneous power losses in HTS stacked cables with a limited number of tapes per stack, achieving sufficient accuracy at high fields. The analytical model enables a sufficiently accurate assessment of the heat deposited on the conductor during those particular instants of a plasma scenario where the variation of the field is very high, such as during the critical initial discharge period of the plasma initiation.

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Development of a Conduction-Cooled HTS SMES

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Design and Test Performance of 2g Pancake Coils for Hts Dc Induction Heater Prototype

Manufacture and Testing of Pre-prototype HTS Twisted Stack Slotted-Core Cable

Modeling of the Stacked High-Temperature Superconducting Cable-in-Conduit Conductor for High-Field Magnet Applications

Preliminary Design Study on Non-Twisted HTS Conductor for Fusion Applications

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Design Study on a 100-Ka/20-k HTS Cable for Fusion Magnets

Development of YBCO Insert for a 25 T All Superconducting Magnet

Design and Development of Turn Insulation Automatic Wrapping System for CRAFT TF

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Development of Testing Device for Critical Current Measurements for HTS/LTS

White Paper on High Temperature Superconducting Bi-2212 Magnets for Energy Frontier Circular Colliders

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

A newly developed 10kA-level HTS conductor: innovative tenon-mortise-based modularized conductor (TMMC) based on China ancient architecture

AC losses in HTS sector shaped high-current conductors for fusion coils

Experimental study on the an-isotropic critical current of REBCO tape