Abstract:Proton beam with an average power of 5 MW-10 MW have important applications in particle physics towards the intensity frontier, as well as in the advanced energy, and material science. The fixed field alternating gradient (FFAG) accelerator combines the advantages of existing accelerators, which has a higher limitation of beam energy than high power cyclotron and has a higher beam-to-grid efficiency than existing high power linac and synchrotron, thus is considered as a good candidate for high power proton machine. By utilizing the strong focusing and large acceptance features of FFAG in the theoretical framework of the fixed field and fixed frequency of isochronous cyclotron, a continue wave FFAG capable of producing 2 GeV/3 mA protons (with an beam power of 6 MW) has been proposed in China Institute of Atomic Energy (CIAE). Due to the beam loss of high power proton beams, the resulting high radiation will deposit a large amount of radiation dose and heat load on the superconducting (SC) magnet. As the high temperature superconductors (HTS) have a much larger thermal margin due to high critical temperature (> 90 K) and high upper critical field (>100 T) than the traditional low temperature superconductors, and have been also considered have the lower overall construction costs and power consumption than the conventional magnet, currently the HTS magnet is the favorable solution for the 2 GeV FFAG magnet design. In this paper, the lattice design along with the requirements on the F-D-F magnet of the 2 GeV FFAG design is briefly introduced first. Then, the design of the F-D-F magnet is outlined. The details of the HTS coil design utilizing ReBCO conductor and operating at ~30 K is also included.

White Paper on High Temperature Superconducting Bi-2212 Magnets for Energy Frontier Circular Colliders

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Conceptual Design of an HTS Dipole Insert Based on Bi2212 Rutherford Cable

Development of a Bi-2212 Solenoid Insert Coil in a 12 T Superconducting Magnet

Conceptual Design of a HTS CICC Coil for Fusion Devices based on Bi-2223 Tapes

Superconductivity for Magnets

Development of YBCO Insert for a 25 T All Superconducting Magnet

Status of high temperature superconductor based magnets and the conductors they depend upon

The Optimal Design of a 300~MJ Superconducting Magnet Using HTS Tapes

What is Needed for BiSCO to Work in a Dipole Insert for 20 Tesla Hybrid Accelerator Magnets

High Magnetic Field Superconducting Magnet System Up to 25 T for ExCES

Critical Current Analysis of an Ybco Insert for Ultrahigh-Field All-Superconducting Magnet

Design study of conduction-cooled high temperature superconducting magnet

Development of conduction-cooled high temperature superconducting magnet

Insert Magnet and Shim Coils Design for a 27 T Nuclear Magnetic Resonance Spectrometer with Hybrid High and Low Temperature Superconductors

The Technology of Fabrication & Application of Bi-2223 HTS Wires at InnoST

Development of persistent joints for superconducting Bi-2212 coils

Influence of Torsional Strain on the Bi-2212 Tapes and Round Wires under Background Field

Electromagnetic Design of HTS D-shaped Coils for a Toroidal-type Superconducting Magnet

Large Superconducting Magnet Systems

Preliminary Study of the High Temperature Superconducting Solution for 2 GeV CW FFAG Magnet