Abstract:The Central Solenoid Model Coil (CSMC) project of China Fusion Engineering Test Reactor (CFETR) was developed from 2014 at the Institute of Plasma and Physics Chinese Academy of Sciences (ASIPP) to verify the larger-scale superconducting magnet technology. The short twist pitch (STP) option was chosen for Nb3Sn Cable-In-Conduit Conductors (CICC) due to the stronger rigidity which can withstand the higher electromagnetic (EM) cycles effectively. Performance measurement of conductor short samples in SULTAN facility is the most important assessment method. This paper introduces the Nb3Sn strand parameters and CICC design firstly; then the preparation and measurement procedure of conductor short samples for current sharing temperature (T-cs) are described; subsequently, the T-cs vs. cycles, effective strain (epsilon(eff)) with B x I and transition broadness characteristics compared with strands are assessed qualitatively by power law model. The assessment result shows that the DC performance vs. cycles of the STP design for Nb3Sn CICC is very stable and no degradation. The notable result gives the confidence that life period in the CSMC can be achieved reliably although the number of the EM cycles has been limited to below 10 000 in the measurement. The successful DC performance testing of Nb3Sn CICC will be an important milestone for CSMC project. Lastly, the performance assessment in coil is performed at the typical test waveform. The minimum temperature margin (T-mag) of 0.14 K and electric field of 5 uV/m are achieved respectively. Some slow EM cycles is required to decrease the coupling loss deposition before coil testing.

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Electromagnetic and Mechanical Analysis of DC Magnet for Super X Test Facility

Thermal–hydraulic Analysis of the Coil Test Facility for CFETR

Preliminary Design of DC Magnet for Super-X Test Facility

Analysis of Temperature Uniformity During Heat Treatment of Nb3Sn Coils for DC Magnet in Super-X Test Facility

Basic Design and Progress of Central Solenoid Model Coil for CFETR

Overview of the Design Status of the Superconducting Magnet System of the CFETR

Structural Design of DC Magnet for Super-X Test Facility

Concept Design of the CFETR Central Solenoid

Stability Analysis on Nb3Sn Sample Conductor of CFETR Central Solenoid Model Coil

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Electromagnetic Optimization and Preliminary Mechanical Analysis of the CFETR CS Model Coil

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Performance Test and Analysis of the First Large-Scale Cable-in-conduit Conductor with High Jc Nb3Sn Strand for Fusion Reactor

Quench Analysis and Experiments on Nb3Sn Superconducting Magnet Half-Length Prototype

Conceptual design and analysis of CFETR magnets

Preliminarily Static Analysis of CFETR Central Solenoid Magnet System

Thermal-Hydraulic Performance Analysis of the Superconducting Magnet During the Trip of the Resistive Magnet in Chmfl Hybrid Magnet

Evaluating Conductor Design and Stability Performance for the Conductor of High-Field Winding Package in CFETR TF Coil

Design study of conduction-cooled high temperature superconducting magnet

DC Performance Measurement and Assessment of Nb 3 Sn Cable-In-Conduit Conductor for CFETR CS Model Coil