Abstract:This study reviews the current state of III‐nitride synthesis on different 2D materials for a variety of flexible applications, meanwhile identifying key advances in this rapidly accelerating field. The focus of this study is to provide guidelines on the exfoliation of epitaxial layers using 2D materials, with the aim of fabricating flexible nitride devices. Group III‐nitrides have attracted significant attention in recent years for their wide tunable band‐gaps and excellent optoelectronic capabilities, which are advantageous for several applications including light‐emitting diodes, lasers, photodetectors, and large‐size low‐cost power electronic devices. However, conventional epitaxy accompanied by the covalent bond formation renders the transfer of nitride epilayers difficult, thereby limiting the application potential of nitrides in wearable and flexible electronics. Furthermore, interfacial covalent bonds also limit substrate selection and hinder the development of heterogeneous integration between nitrides and other material systems. 2D materials can mitigate these problems significantly. On the one hand, due to the weak van der Waals forces between the layers of 2D materials, influences of lattice mismatch can be avoided to improve crystal quality. On the other hand, delamination and transfer of nitride epilayers can be achieved easily. Therefore, this study focuses on providing comprehensive guidelines regarding the exfoliation of epitaxial layers using 2D materials to provide new design freedoms for nitride devices. Different 2D buffers and release layers have also been discussed. Furthermore, the limitations, promising solutions, future directions, and applicability of this strategy to flexible nitride devices are presented.

Transfer of III-nitride epitaxial layers onto pre-patterned silicon substrates for the simple fabrication of free-standing MEMS

Fabrication of Silicon Nitride Membrane Nanoelectromechanical Resonator

Fabrication of suspending gan microstructures with combinations of anisotropic and isotropic dry etching techniques

Two-step MEMS microfabrication via 3D direct laser lithography

Fabrication of GaN-based MEMS Structures Using Dry-Etch Technique

Fabricating Processes Of Free-Standing Silicon Nitride Thin Film For Mems Devices

Study of GaN Epilayers Growth on Freestanding Si Cantilevers

A hybrid graphene-siliconnitride nanomembrane as a versatile and ultra-widely tunable mechanical device

Van Der Waals Epitaxy of III‐Nitride Semiconductors Based on 2D Materials for Flexible Applications

Fabrication of Large-Area Suspended MEMS Structures Using GaN-on-Si Platform

Wafer-Scale Controlled Exfoliation of Metal Organic Vapor Phase Epitaxy Grown Ingan/Gan Multi Quantum Well Structures Using Low-Tack Two-Dimensional Layered H-Bn

Polymer bonding of GaN crystal layer on silicon substrate for micro mechanical resonator applications

Fabrication of NEMS Structures on the Thin SOI Substrate

Soft chemistry assisted On-chip Integration of Nanostructured quartz-based Piezoelectric Microelectromechanical System

Soft‐Chemistry‐Assisted On‐Chip Integration of Nanostructured α‐Quartz Microelectromechanical System

Novel 3-D Device Fabrication Process in Micro-Electronic Mechanical System Based on Nano-Imprint Lithography

Scaling of piezoelectric in-plane NEMS: Towards nanoscale integration of AlN-based transducer on vertical sidewalls

(Invited) Ge/III-V Heterostructures and Their Applications in Fabricating Engineered Substrates

Recent Advances in Mechanically Transferable III‐Nitride Based on 2D Buffer Strategy

Nano selective area growth of GaN by MOVPE on 4H-SiC using epitaxial graphene as a mask: towards integrated III-nitride / graphene / SiC electronics and optoelectronics