Abstract:Active microelectromechanical systems can couple the nanomechanical domain with the electronic domain by integrating electronic sensing and actuation mechanisms into the micromechanical device. This enables very fast and sensitive measurements of force, acceleration, or the presence of biological analytes. In particular, strain sensors integrated onto MEMS cantilevers are widely used to transduce an applied force to an electrically measurable signal in applications like atomic force microscopy, mass sensing, or molecular detection. However, the high Young's moduli of traditional cantilever materials (silicon or silicon nitride) limit the thickness of the devices, and therefore the deflection sensitivity that can be obtained for a specific spring constant. Using softer materials such as polymers as the structural material of the MEMS device would overcome this problem. However, these materials are incompatible with high-temperature fabrication processes often required to fabricate high quality electronic strain sensors. We introduce a pioneering solution that seamlessly integrates the benefits of polymer MEMS technology with the remarkable sensitivity of strain sensors, even under high-temperature deposition conditions. Cantilevers made using this technology are inherently fluid compatible and have shown up to 6 times lower force noise than their conventional counterparts. We demonstrate the benefits and versatility of this polymer/ceramic/semiconductor multi-layer fabrication approach with the examples of self-sensing AFM cantilevers, and membrane surface stress sensors for biomolecule detection.

Soft chemistry assisted On-chip Integration of Nanostructured quartz-based Piezoelectric Microelectromechanical System

Soft‐Chemistry‐Assisted On‐Chip Integration of Nanostructured α‐Quartz Microelectromechanical System

Nanostructure engineering of epitaxial piezoelectric α-quartz thin films on silicon

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

Femtosecond laser-assisted fabrication of piezoelectrically actuated crystalline quartz-based MEMS resonators

Mechanical and optical nanodevices in single-crystal quartz

Research on a Micro-Processing Technology for Fabricating Complex Structures in Single-Crystal Quartz

A hybrid polymer/ceramic/semiconductor fabrication platform for high-sensitivity fluid-compatible MEMS devices with sealed integrated electronics

Microfabrication of piezoelectric MEMS based on thick LiNbO3 single-crystal films

Monolithically Integrated Microelectromechanical Systems for On-Chip Strain Engineering of Quantum Dots

Study on Compatible Cmos-Mems Process with Surface Micromachining for the Application of Monolithic Integration

Giant piezoelectricity on Si for hyperactive MEMS

Process-induced stress and hydrogen effects on monolithic integrated BiCMOS-MEMS resonators

Atomistic-Benchmarking towards a protocol development for rapid quantitative metrology of piezoelectric biomolecular materials

Fabrication and Characterization of Piezoelectric Cantilever for Micro Transducers

PZT Piezoelectric Function Structure on Silicon Sustbrate

A Novel Resonant Accelerometer Based on Quartz on Silicon (Qos)

Post-CMOS Processing for High-Aspect-ratio Integrated Silicon Microstructures

Robust Free‐Standing Nano‐Thin SiC Membranes Enable Direct Photolithography for MEMS Sensing Applications

Application of a Femtosecond Laser in the Fabrication of Quartz Sensing Elements for MEMS Accelerometers