Abstract:<p>The application of gasification to thermally treat biomass as carbon neutral resources has been constrained by the technical challenges associated with tar formations, which cause operational problems in downstream equipment for syngas processing. Catalysts, such as transition metals, calcined rocks and char, can be used to catalyse tar reforming. Biochars, which are naturally produced during biomass gasification, are particularly attractive as an alternative catalyst due to their catalytic functions, low cost and long endurance. Despite these promising characteristics, adequate knowledge on the relationship between the porous structure of biochar and its deactivation by coking during the steam reforming of tars is not available. In this work, the influence of the porous structure of biochar on its performance across time for reforming tar was investigated in a fixed-bed reactor, over a temperature range from 650 to 850 °C. Regular biochar and physically activated biochar from the same precursor biomass were employed as bed material. The tar samples were the composed mixture of benzene, toluene and naphthalene. Both fresh and spent catalysts were analysed with Brunauer-Emmet-Teller, t-plot, Fourier Transform Infrared and Scanning Electron Microscopy/Energy Dispersive Spectroscopy. Results showed that, while at moderate temperatures of 650 and 750 °C, the activated biochar offered a higher tar conversion but more severe deactivation than that of the regular biochar. At the high temperature of 850 °C, the difference in the catalytic performance between the two chars was negligible, and over 90% of the initial tar species were removed throughout the 3-hour long experiments. At 850 °C, the coke deposited in the meso- and macro-pores of both chars was gasified, leading to a stable catalytic performance of both chars. The results indicated that meso- and macro-porous biochars are resilient and active enough to become a viable option for tar steam reforming.</p>

Synthesis and evaluation of pyrolysis waste peat char supported catalyst for steam reforming of toluene

Pyrolysis Char Derived from Waste Peat for Catalytic Reforming of Tar Model Compound

Catalytic toluene steam reforming using Ni supported catalyst from pyrolytic peat

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound

Catalytic Steam Reforming of Biomass Tar Model Compounds with Low Cost Catalysts: Effect of Operation Conditions

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Evaluation of the catalytic performance of different activated biochar catalysts for removal of tar from biomass pyrolysis

Reactivity and deactivation mechanisms of toluene reforming over waste peat char-supported Fe/Ni/Ca catalyst

Pyrolysis waste char supported metallic catalyst for syngas production during catalytic reforming of benzene

Photothermal Steam Reforming: A Novel Method for Tar Elimination in Biomass Gasification

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Optimization of Operating Parameters for Tar Reforming/hydrogen Upgrading in Corn Straw Pyrolysis Polygeneration

Performance of biochar as a catalyst for tar steam reforming: Effect of the porous structure

Synergistic effect of hydrogen atmosphere and biochar catalyst on tar decomposition and methane-rich gas production during biomass pyrolysis

Catalytic performance of activated lignite chars on biomass tar cracking

Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen

Catalytic Cracking of Primary Tar Vapor from Biomass over High Ash-Containing Paper Sludge Ash

Arming wood carbon with carbon-coated mesoporous nickel-silica nanolayer as monolithic composite catalyst for steam reforming of toluene

Potential of tire pyrolysis char as tar-cracking catalyst in solid waste and biomass gasification

Effects of K and Ca on Reforming of Model Tar Compounds with Pyrolysis Biochars under H2o or Co2