Abstract:Biomass derived chars via simple synthesis methods play an important role in different applications due to their porous structure, low cost and potential for the catalysis research field. This work prepared three typical activated char catalysts using KOH, H3PO4 and ZnCl2 as activators and rice husk as precursor for the catalytic decomposition of tar from biomass pyrolysis. Results showed that high surface areas were achieved and inorganic elements were introduced by applying the activators. The char obtained by KOH activation exhibited excellent catalytic performance on tar decomposition due to the high surface area and the presence of potassium compounds. Activation using H3PO4 led to a more heterogeneous pore size distribution of biochar, also exhibiting high catalytic performance, while the activation of ZnCl2 might promote the agglomeration of zinc and rice husk containing inorganic matters, resulting in relatively lower tar conversion efficiency. The tar catalytic decomposition led to the significant increase in the yield of product gas, particularly the combustible gas components such as H2, CO and CH4. GC-MS test results showed that macromolecular tar components were generally cracked and phenol was the main components of the residue tar, representing the good selectivity of the catalysts. The catalysts also showed excellent stability for tar cracking process and high catalytic performance was still achieved after five cycling tests. The biochar catalysts remained good porous structure with high surface area and the metals phases were well retained after five recycles, indicating that the biochar catalysts have the potential for long-term practical applications.

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound

Pyrolysis Char Derived from Waste Peat for Catalytic Reforming of Tar Model Compound

Pyrolysis waste char supported metallic catalyst for syngas production during catalytic reforming of benzene

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Insight into the Ex Situ Catalytic Pyrolysis of Biomass over Char Supported Metals Catalyst: Syngas Production and Tar Decomposition

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

Ferric sludge derived pyrolyzed-hydrochar supported iron catalysts for catalytic cracking of toluene

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Synthesis and evaluation of pyrolysis waste peat char supported catalyst for steam reforming of toluene

Ex-Situ Catalytic Pyrolysis of Wastewater Sewage Sludge - A Micro-Pyrolysis Study

Synthesis of biomimetic monolithic biochar-based catalysts for catalytic decomposition of biomass pyrolysis tar

Waste tire derived char supported Ni‐Fe catalyst for catalytic thermochemical conversion of wet municipal solid waste

Cracking of Model Tar Species from the Gasification of Municipal Solid Waste Using Commercial and Waste-Derived Catalysts

The Removal of Tar and the Production of Methane-Rich Gas from Biomass Hydrogen Pyrolysis by Using Biochar-Based Catalysts

Porous coal char-based catalyst from coal gangue and lignite with high metal contents in the catalytic cracking of biomass tar

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Evaluation of the catalytic performance of different activated biochar catalysts for removal of tar from biomass pyrolysis

Preparation of High Catalytic Activity Biochar from Biomass Waste for Tar Conversion

Experimental study on catalytic effect of biomass pyrolysis volatile over nickel catalyst supported by waste iron slag

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles