Abstract:Tar contained in gasification syngas is one of the most problematic species that restricts the gasification efficiency and system availability. The catalytic decomposition of tar is a novel technology to clean the produced syngas. In this article, the interactions of cellulose and polyvinyl chloride (PVC) on the catalytic cracking of tar contained in municipal solid waste gasification syngas were experimentally studied. Results show that at the pyrolysis temperatures of 500 and 600 degrees C the catalytic cracking efficiency was 91-98% for tar derived from a single feedstock. When cellulose was mixed with PVC, the tar cracking efficiency decreased to 68-90% because of the interactions during the copyrolysis and decomposition reactions. Gas chromatography (GC) and gas chromatography mass spectrometry (GC-MS) were employed to identify the main compositions of gaseous product and hydrocarbon species after cracking. The GC-MS results show that 99% of tar species have a carbon number less than 10 when the calcined dolomite catalyst was used. During the copyrolysis, PVC plays a dominant role in the formation of tar. The GC analysis shows that copyrolysis yields more CH4, C2H4, C2H6, and C2H2 and less CO than those from a single feedstock. Brunauer-Emmett-Teller, scanning electron microscopy, energy dispersive spectroscopy, and X-ray fluorescence analyses were used to characterize the catalyst before and after reaction. Results indicate that after mixing, the poisoning of catalyst by chlorine increased by 3-15 times, accounting for the low conversion ratio of tar derived from a mixture of cellulose and PVC.

Cracking of Model Tar Species from the Gasification of Municipal Solid Waste Using Commercial and Waste-Derived Catalysts

Catalytic Cracking of Toluene As A Tar Model Compound Using Sewage-Sludge-Derived Char

Experimental Study on the Cracking of Tar Derived from Municipal Solid Waste Gasification to Produce Syngas

Effect of Cellulose and Polyvinyl Chloride Interactions on the Catalytic Cracking of Tar Contained in Syngas

Heterogeneous Cracking Reaction of Tar over Biomass Char, Using Naphthalene As Model Biomass Tar

Investigation on Model Compound of Biomass Gasification Tar Cracking in Microwave Furnace: Comparative Research

Catalytic Cracking of Biomass Tar over Char Supported Nickel Catalyst

Study on Sulfur Conversion Characteristics in Catalytic Cracking of Coal Tar in the Presence of Dolomite-Supported Catalysts

Mechanism on catalytic cracking tar with CaO-based catalysts for hydrogen-rich gas by DFT and experiments

Novel Catalyst for Cracking of Biomass Tar

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Catalytic cracking of tar derived from the pyrolysis of municipal solid waste fractions over biochar

Catalytic Cracking Conversion of Tar Component in High Temperature Coal Gas

Performance of catalytic cracking of biomass tar and catalyst preparation

EFFECT OF CHAR ON CATALYTIC CRACKING OF TAR FROM BIOMASS GASIFICATION GAS WITH TOLUENE AS A MODEL COMPOUND

Effects of Solid Acid and Alkali Catalysts on Catalytic Cracking of Biomass Tar

Influence of Catalytic Cracking of Tar on Gas Component

PERFORMANCE OF CATALYTIC CRACKING OF BIOMASS TAR

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5