Abstract:The number of end-of-life waste tyres has increased enormously worldwide, which is one of the non-biodegradable Municipal Solid Waste (MSW) piling up in an open space for a long time. Every year, various types of tyres are released in the environment from different vehicles, such as trucks, buses, cars, motorcycles, and bicycles, which negatively impact the environment. Nowadays, waste tyres are treated in several ways, whereas thermochemical conversion is one of them, including combustion, gasification, incineration, and pyrolysis. Many literatures revealed that pyrolysis is a more environmentally friendly process than others since it can convert waste tyres into crude oil, char, and syngas without emitting harmful gases. In this study, the pyrolysis of tyres and the chemical activation of tyres are reviewed in terms of their kinetic behaviour. According to the literature, the most influential factors of the pyrolysis process are reactors, temperature, heating rate, residence time, feedstock size and catalyst. As the main ingredient of the tyre is rubber, tyre pyrolysis starts from 300 °C and completely decomposed nearly 550 °C. It can be found from literature that Pyrolysed tyre can produce 30-65% oil, 25-45% char and 5-20 % gas. It is also explained how the properties of active carbon (AC) are affected by activating conditions, including activation temperature, agent, the ratio of reagent mixture and others. Generally, pyrolytic char has surface area between 20 and 80 m2/g, whereas tyre-derived activated carbon's (TDAC) surface area varied from 90 to 970 m2/g. For large surface area and porous structure, TDAC has large application in purification and energy storage sector. The individuality of this article is to depict the entire pathway of AC production from waste tyres. The findings of this literature review help to improve technologies for producing activated carbon from waste tyres pyrolysed char.

Potential of tire pyrolysis char as tar-cracking catalyst in solid waste and biomass gasification

Catalytic pyrolysis of tire waste: Impacts of biochar catalyst on product evolution

Waste tire derived char supported Ni‐Fe catalyst for catalytic thermochemical conversion of wet municipal solid waste

Experimental Study on the Cracking of Tar Derived from Municipal Solid Waste Gasification to Produce Syngas

Catalytic performance of activated lignite chars on biomass tar cracking

Catalytic cracking of tar derived from the pyrolysis of municipal solid waste fractions over biochar

Pyrolysis Char Derived from Waste Peat for Catalytic Reforming of Tar Model Compound

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound

Effect of spent fluid catalytic cracking (FCC) catalyst on syngas production from pyrolysis and CO2-assisted gasification of waste tires

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Study on pyrolysis characteristics, kinetics and thermodynamics of waste tires catalytic pyrolysis with low-cost catalysts

Activation of pyrolytic chars derived from used tires

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Dynamic Pyrolysis Characteristics, Kinetics and Products Analysis of Waste Tire Catalytic Pyrolysis with Ni/Fe-ZSM-5 Catalysts Using TG-IR-GC/MS

Cracking of Model Tar Species from the Gasification of Municipal Solid Waste Using Commercial and Waste-Derived Catalysts

Investigation of hot char catalytic role in the pyrolysis of waste tires in a two-step process

Ignition and Emission Characteristics of Waste Tires Pyrolysis Char Co-Combustion with Peat and Sawdust

BTEX recovery from waste rubbers by catalytic pyrolysis over Zn loaded tire derived char

Catalytic Tar Conversion in Two Different Hot Syngas Cleaning Systems

End-of-life tyre conversion to energy: A review on pyrolysis and activated carbon production processes and their challenges

Waste derived ash as catalysts for the pyrolysis-catalytic steam reforming of waste plastics for hydrogen-rich syngas production