Abstract:This research focused on the reaction features and kinetics of tar catalytic conversion by char based on the generation and evolution of gas products. To probe the roles of heat and catalysis in tar conversion, a micro fluidized bed reaction analyzer (MFBRA) was used to assess tar thermal cracking (TC) and catalytic cracking (CC) by char at 1073, 1123, 1173, and 1223 K. The tar cracking behavior of the individual gas components (H 2 , CO, CO 2 , and CH 4 ), generation rates, and reaction kinetics were thoroughly investigated. The results show that TC and CC included a fast (Stage-1) and slow (Stage-2) conversion stage, in which Stage-1 contributed more than 80% of the total conversion. Compared to TC, tar CC required a longer reaction time but obtained higher conversions to individual gas components and the total gas products. The final conversion ratios ( X CC/TC ) of H 2 , CO, CO 2 , and CH 4 were kept above 1 at the tested temperature. The char catalytic action was very remarkable, especially at low temperatures. In tar CC, the generation rate of individual gas components slowly declined after quickly reaching the peak, forming a relatively stable zone. The volume reaction model (VRM) well described the tar conversion behavior with and without char. Compared to TC, char lowered the activation energy ( Ea ) of gas generation. For individual gas components (H 2 , CO, CO 2 , CH 4 ) and the total gas products, the corresponding reduction degree of Ea was 25.56%, 24.18%, 22.14%, 4.75%, and 21.71%, respectively, further displaying the promoting impact of char. The evaluated generation features and kinetics of individual components in the gas products will benefit the in-situ tar removal in the biomass gasification process.

Influence of Catalytic Cracking of Tar on Gas Component

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Advance in the treatment methods of biomass tar

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Effects of Catalyst Particle Size and Mass on Catalytic Cracking of Biomass Pyrolysis Tar

Effects of Solid Acid and Alkali Catalysts on Catalytic Cracking of Biomass Tar

Catalytic Materials Based on the Catalytic Cracking of Biomass Tar

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

Effects of Catalytic Cracking Conditions on Biomass Tar Cracking

Effect of Cellulose and Polyvinyl Chloride Interactions on the Catalytic Cracking of Tar Contained in Syngas

Interaction mechanism in tar group components during the catalytic upgrading of gaseous tar

Catalytic performance of activated lignite chars on biomass tar cracking

Secondary Tar Components in the Catalytic Cracking Process of Biomass Tar

Investigation on Model Compound of Biomass Gasification Tar Cracking in Microwave Furnace: Comparative Research

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites

Experimental Study on Tar Cracking in Coal Pyrolysis and Gasification Process

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

Experimental Study on the Cracking of Tar Derived from Municipal Solid Waste Gasification to Produce Syngas