Abstract:High boiling point heavy tar compounds such as pyrene and naphthalene are key factors causing corrosion and blockage in the pipelines of biomass thermal utilization equipment, and catalytic reforming represents an effective means to address heavy tar issues. Biomass carbon, characterized by its cost-effectiveness, high efficiency, and environmental friendliness, is envisioned as a catalyst carrier with extensive application prospects. In this study, the tar produced by a biomass fixed-bed gasifier was investigated, with an initial analysis of the pyrolysis process and definition of its different stages conducted. It was discovered that the condensation and secondary cracking stages are the predominant phases for the formation of heavy tars, including polycyclic aromatic hydrocarbons (PAHs). Carbon-based carriers were prepared using apricot shell as the raw material, and biomass carbon-based catalysts were synthesized via impregnation methods. The heavy tar extracted from the original tar through distillation was utilized in the hydrogen production tests of steam catalytic reforming with biomass carbon-based catalysts. The investigation into the impact of temperature, steam-to-tar mass ratio (S/T), and tar-to-catalyst mass ratio (T/C) on the catalytic reforming of tar has been conducted. In considering a variety of parameters, including hydrogen production rate, tar conversion rate, and the volume of hydrogen generated, it was found that under the conditions of 800 °C, S/T = 3, and T/C = 2, the Ni/C catalyst yielded the highest amount of hydrogen (91.52 g H2/kg tar) with a tar conversion rate of 93.30 %. The Ni-Co/C composite catalyst exhibited stronger catalytic activity and superior deactivation resistance compared to the monometallic catalysts. For the latter, steam regeneration methods effectively restored the catalytic activity of the carbon-based catalysts, enhancing the hydrogen yield rates of Ni/C and Co/C catalysts by 2.74 and 1.55 times respectively.

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Catalytic Steam Reforming of Biomass Tar Model Compounds with Low Cost Catalysts: Effect of Operation Conditions

Low-Temperature Steam Reforming of Toluene and Biomass Tar over Biochar-Supported Ni Nanoparticles

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Recent progress in the development of catalysts for steam reforming of biomass tar model reaction

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Steam reforming of biomass gasification tar over Ni-based catalyst supported by TiO2-SiO2 composite

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

Preparation of highly dispersed lignite-char-supported cobalt catalyst for stably steam reforming of biomass tar at low temperature

Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Steam Reforming of Tar Studied in Bench-Scale Experiments and Pilot-Scale Tests with Simulations

Experimental study on hydrogen production from heavy tar in biomass gasification furnace catalyzed by carbon-based catalysts

Arming wood carbon with carbon-coated mesoporous nickel-silica nanolayer as monolithic composite catalyst for steam reforming of toluene

Steam reforming of aromatics mixture as a model tar over Ni/Al 2 O 3 structured catalyst

Recent Advances in Catalyst Technology for Biomass Tar Model Reforming: Thermal, Plasma and Membrane Reactors

Highly efficient steam reforming of biomass tar model compound using a high-entropy alloy-based structured catalyst

Catalytic Steam Reforming of Benzene as a Bio-tar Model Compound over Ni–Fe/TiO 2 Catalysts

Synthesis of biomimetic monolithic biochar-based catalysts for catalytic decomposition of biomass pyrolysis tar