Arming wood carbon with carbon-coated mesoporous nickel-silica nanolayer as monolithic composite catalyst for steam reforming of toluene

Haiyang Xu,Zhangfeng Shen,Siqian Zhang,Gang Chen,Hu Pan,Zhigang Ge,Zheng Zheng,Yanqin Wang,Yangang Wang,Xi Li
DOI: https://doi.org/10.1016/j.jcis.2021.04.112
IF: 9.9
2021-10-01
Journal of Colloid and Interface Science
Abstract:<p>Steam reforming is an effective measure for biomass tar elimination as well as H<sub>2</sub>-rich syngas (H<sub>2</sub> + CO) production. However, the granular or powdery Ni-based catalysts are prone to deactivation, which is caused by inappropriate mass transfer and clogging of catalyst bed. Herein, monolithic wood carbon (WC) with low-tortuosity microchannels is armed with a carbon-coated mesoporous nickel-silica nanocomposite (Ni-SiO<sub>2</sub>@C) layer via an evaporation-induced self-assembly and calcination procedure for toluene (tar model compound) steam reforming. The quality of the Ni-SiO<sub>2</sub>@C layer growing on the surface of WC microchannel is affected by the molar ratios of Si/Ni feed. A uniform thin-layer coverage is obtained on the Ni-15SiO<sub>2</sub>@C/WC (Si/Ni=15) catalyst, where highly dispersed Ni nanoparticles (average size of 6.6 nm) with appropriate metal-support interaction and remarkable mechanical strength are achieved. The mass transfer, coke resistance, and hydrothermal stability of the Ni-15SiO<sub>2</sub>@C/WC catalyst were significantly improved by the multilevel structure assembled from the WC microchannels and the secondary ordered SiO<sub>2</sub> mesopores. A stable toluene conversion over 97% with an H<sub>2</sub> yield of 135 μmol/min was obtained at 600 °C on the Ni-15SiO<sub>2</sub>@C/WC catalyst. This work opens a new window for facilely constructing high-performance wood carbon-based monolithic tar reforming catalyst.</p>
chemistry, physical
What problem does this paper attempt to address?