Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Wen Tang,Jing-Pei Cao,Zhi-Hao Wang,Zi-Meng He,Tian-Long Liu,Ze-Ying Wang,Fei-Long Yang,Jie Ren,Xiao-Yan Zhao,Xiao-Bo Feng,Hong-Cun Bai
DOI: https://doi.org/10.1016/j.enconman.2021.114454
IF: 10.4
2021-09-01
Energy Conversion and Management
Abstract:<p>The development of cheap and highly dispersed nano-catalyst is one of the key technologies for low temperature steam reforming (SR) of biomass tar. This work used acid-washed and oxidized Shengli lignite char (OXAWSL) as carbon precursor to load Co (Co/OXAWSL) and Ni (Ni/OXAWSL) via ion exchange method to SR of toluene and biomass tar. The Co/OXAWSL was more active and stable than Ni/OXAWSL during the 30 h test with a final toluene conversion of 85% at a relatively low temperature of 450 °C and steam to carbon ratio (S/C) of 3.4, which resulted from its small particle size (5.6 nm) and high dispersion (12.3%) of Co. The relatively high H<sub>2</sub> production (42.59 mmol/g-biomass) over Co<sub>0.1</sub>/OXAWSL (450 °C, S/C = 3.4) in SR of tar was also obtained. A low <em>E</em><sub>a</sub> (22.0 kJ/mol) value of Co/OXAWSL and good affinity to oxygen for Co explained its excellent performance. The low-temperature tar cracking process can provide theoretical and technical support for the large-scale industrial utilization of biomass pyrolysis and gasification.</p>
energy & fuels,thermodynamics,mechanics
What problem does this paper attempt to address?