Abstract:Tar elimination is the bottleneck which hinders the industrial application of gasification due to the risks of corrosion and blockage in downstream components. Tar production decreases the energy efficiency of gasification systems. The steam reforming is attractive for tar treatment, but the high reaction temperature limits its applications. Photothermal catalysis has the potential to decompose organic pollutants, and it is expected to improve tar removal and reduce the reaction temperature. So, the photothermal steam reforming of toluene was performed to evaluate the toluene conversion. The effects of the toluene concentration, the temperature, the steam to carbon ratio, and the ultraviolet light intensity were investigated. The results showed that, compared with the thermal steam reforming, the photothermal steam reforming could significantly improve the conversion of toluene and promote the formation of gaseous products, especially H-2. At 600 degrees C, the conversion of toluene in the photothermal steam reforming was 90.1%, which was 16.3% higher than that in the thermal steam reforming. Moreover, the mechanisms of the photothermal steam reforming were revealed. The introduction of the ultraviolet irradiation could strongly promote the toluene decomposition and alter the reaction pathways. The carbon deposition and agglomeration of the catalyst were inhibited in photothermal steam reforming. Meanwhile, the toluene removal performance and the energy consumption were compared in photothermal and thermal steam reforming. The potential applications of photothermal catalytic tar removal were also described. These findings proposed a novel approach for low-cost but high-efficiency biomass tar removal, thus promoting the clean utilization of biomass energy.

Catalytic Steam Reforming of Biomass Tar Model Compounds with Low Cost Catalysts: Effect of Operation Conditions

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

Conversion of Biomass-Derived Tars in a Fluidized Catalytic Post-Gasification Process

Low-Temperature Steam Reforming of Toluene and Biomass Tar over Biochar-Supported Ni Nanoparticles

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Catalytic Tar Conversion in Two Different Hot Syngas Cleaning Systems

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Steam reforming of aromatics mixture as a model tar over Ni/Al 2 O 3 structured catalyst

Photothermal Steam Reforming: A Novel Method for Tar Elimination in Biomass Gasification

Recent progress in the development of catalysts for steam reforming of biomass tar model reaction

Synthesis and evaluation of pyrolysis waste peat char supported catalyst for steam reforming of toluene

Recent progress on catalyst development in biomass tar steam reforming: toluene as a biomass tar model compound

Optimal Fe/Ni/ Ca‐Al catalyst for tar model steam reforming by using the Taguchi method

Optimization of Operating Parameters for Tar Reforming/hydrogen Upgrading in Corn Straw Pyrolysis Polygeneration

Low-temperature Catalytic Steam Reforming of Toluene As a Biomass Tar Model Compound over Three-Dimensional Ordered Macroporous Ni-Pt/Ce1−xZrxO2 Catalysts

Catalytic toluene steam reforming using Ni supported catalyst from pyrolytic peat

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Catalytic Steam Reforming of Benzene as a Bio-tar Model Compound over Ni–Fe/TiO 2 Catalysts