Abstract:Tar elimination is the bottleneck which hinders the industrial application of gasification due to the risks of corrosion and blockage in downstream components. Tar production decreases the energy efficiency of gasification systems. The steam reforming is attractive for tar treatment, but the high reaction temperature limits its applications. Photothermal catalysis has the potential to decompose organic pollutants, and it is expected to improve tar removal and reduce the reaction temperature. So, the photothermal steam reforming of toluene was performed to evaluate the toluene conversion. The effects of the toluene concentration, the temperature, the steam to carbon ratio, and the ultraviolet light intensity were investigated. The results showed that, compared with the thermal steam reforming, the photothermal steam reforming could significantly improve the conversion of toluene and promote the formation of gaseous products, especially H-2. At 600 degrees C, the conversion of toluene in the photothermal steam reforming was 90.1%, which was 16.3% higher than that in the thermal steam reforming. Moreover, the mechanisms of the photothermal steam reforming were revealed. The introduction of the ultraviolet irradiation could strongly promote the toluene decomposition and alter the reaction pathways. The carbon deposition and agglomeration of the catalyst were inhibited in photothermal steam reforming. Meanwhile, the toluene removal performance and the energy consumption were compared in photothermal and thermal steam reforming. The potential applications of photothermal catalytic tar removal were also described. These findings proposed a novel approach for low-cost but high-efficiency biomass tar removal, thus promoting the clean utilization of biomass energy.

Recent progress in the development of catalysts for steam reforming of biomass tar model reaction

Recent progress on catalyst development in biomass tar steam reforming: toluene as a biomass tar model compound

Recent Advances in Catalyst Technology for Biomass Tar Model Reforming: Thermal, Plasma and Membrane Reactors

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Modified nickel-based catalysts for improved steam reforming of biomass tar: A critical review

Catalytic steam reforming of tar for enhancing hydrogen production from biomass gasification: a review

Understandings of Catalyst Deactivation and Regeneration during Biomass Tar Reforming: A Crucial Review

Recent progress and perspectives of catalyst design and downstream integration in biomass tar reforming

Catalytic Steam Reforming of Biomass Tar Model Compounds with Low Cost Catalysts: Effect of Operation Conditions

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

Catalytic tar conversion and the prospective use of iron-based catalyst in the future development of biomass gasification: a review

Fundamentals and applications of char in biomass tar reforming

Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen

Steam reforming of aromatics mixture as a model tar over Ni/Al 2 O 3 structured catalyst

Low-Temperature Steam Reforming of Toluene and Biomass Tar over Biochar-Supported Ni Nanoparticles

Highly efficient steam reforming of biomass tar model compound using a high-entropy alloy-based structured catalyst

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Steam Reforming of Tar Studied in Bench-Scale Experiments and Pilot-Scale Tests with Simulations

Photothermal Steam Reforming: A Novel Method for Tar Elimination in Biomass Gasification

The Steam Reforming of Naphthalene over a Nickel–dolomite Cracking Catalyst