Abstract:H2 production can be used as a clean and renewable energy source for various applications, including fuel cells, internal combustion engines, and chemical production. Using nickel-based catalysts for steam reforming biomass tar presents challenges related to catalyst deactivation, poisoning, heterogeneous composition, high process temperatures, and gas impurities. To overcome these challenges, adopting a nickel-based catalyst with selected oxide support and MgO and CaO promoter is a promising approach for improving the efficiency and sustainability of steam reforming for hydrogen production. The majority of studies conducted to date have focused on the steam reforming of particular tar compounds, most commonly benzene, phenol, toluene, or naphthalene, over a range of support catalysts. However, the actual biomass tar composition is complex, and each component impacts how well steam reforming works. In this research, a multi-compound biomass tar model including phenol, toluene, naphthalene, and pyrene underwent a steam reforming process. Various types with 10 wt.% of nickel-based catalysts were generated by the co-impregnation technique, which included 90 wt.% different oxide supports (Al2O3, La2O3, and ZrO2) and 10 wt.% of combination alkaline oxide earth promoters (MgO and CaO). Thermogravimetric analysis, Brunauer–Emmett–Teller (BET) method, N2 physisorption, temperature-programmed reduction (H2-TPR), temperature-programmed desorption (CO2-TPD), and X-ray diffraction (XRD) of ni-based catalyst characterized physiochemical properties of the prepared catalyst. The reaction temperature used for steam reforming was 800 °C, an S/C ratio of 1, and a GHSV of 13,500 h−1. Ni/La2O3/MgO/CaO (NiLaMgCa) produced the most carbon to-gas conversion (86.27 mol%) and H2 yield (51.58 mol%) after 5 h of reaction compared to other catalysts tested in this study. Additionally, the filamentous carbon coke deposited on the spent catalyst of NiLaMgCa does not impact the catalyst activity. NiLaMgCa was the best catalyst compared to other catalysts investigated, exhibiting a stable and high catalytic performance in the steam reforming of gasified biomass tar. In conclusion, this study presents a novel approach by adding a combination of MgO and CaO promoters to a ni-based catalyst with various oxide supports, strengthening the metal-support interaction and improving the acid-base balance of the catalyst surface. The mesoporous structure and active phase (metallic Ni) were successfully developed. This can lead to an increase in the conversion of tar to H2 yield gas and a decrease in the production of undesired byproducts, such as CH4 and CO.

Highly efficiency H 2 production for real coal tar steam reforming over Ni-ca/H-Al catalyst: Effects of oxygen vacancy, CaO doping and synthesis methods

Catalytic Steam Reforming of Real Tar under High-Efficiency Ni/USY Catalyst for H2 Production

The Efficiency of Carbon Conversion and Hydrogen Production from Tar Steam Reforming of Biomass Using Ni-Based Catalysts with Alkaline Earth Promoters

Steam Reforming of Biomass Tar for Hydrogen Production over NiO/ceramic Foam Catalyst

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Carbon-coated mesoporous silica-supported Ni nanocomposite catalyst for efficient hydrogen production via steam reforming of toluene

Highly Efficient Transformation of Tar Model Compounds into Hydrogen by a Ni-Co Alloy Nanocatalyst During Tar Steam Reforming

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Optimal Fe/Ni/ Ca‐Al catalyst for tar model steam reforming by using the Taguchi method

Catalytic Conversion of Tar from Hot Coke Oven Gas Using 1-Methylnaphthalene As a Tar Model Compound

In‐Situ Upgrading of Coal Pyrolysis Tar with Steam Catalytic Cracking over Ni/Al 2 O 3 Catalysts

The study of catalytic reforming of coke oven gas producing hydrogen-rich gas

In-situ Catalytic Upgrading of Coal Pyrolysis Tar Coupled with CO2 Reforming of Methane over Ni-based Catalysts

Nickel Supported over MCM-41 Coated Ceramic Membrane for Steam Reforming of Real Tar

Experimental study on hydrogen production from heavy tar in biomass gasification furnace catalyzed by carbon-based catalysts

Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Hydrogen production from catalytic steam reforming of toluene over trace of Fe and Mn doping Ni/Attapulgite

Noble metal (Pt, Pd and Rh) promoted Ni-Co/Mg(Al)O catalysts for steam reforming of tar impurities from biomass gasification

Steam reforming of toluene over Ni–Co/modified-activated carbon catalyst for hydrogen production: Thermodynamic and experimental analysis

Seeded-growth Preparation of High-Performance Ni/MgAl2O4 Catalysts for Tar Steam Reforming

Promoting effects of Fe-Ni alloy on co-production of H<sub>2</sub> and carbon nanotubes during steam reforming of biomass tar over Ni-Fe/-Al<sub>2</sub>O<sub>3</sub>