Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

In-situ catalytic cracking of coal pyrolysis tar coupled with steam reforming of ethane over carbon based catalyst

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

In-situ catalytic upgrading of coal pyrolysis volatiles over red mud-supported nickel catalysts

Steam reforming of biomass gasification tar over Ni-based catalyst supported by TiO2-SiO2 composite

Highly efficiency H 2 production for real coal tar steam reforming over Ni-ca/H-Al catalyst: Effects of oxygen vacancy, CaO doping and synthesis methods

Catalytic toluene steam reforming using Ni supported catalyst from pyrolytic peat

Preparation and catalytic cracking characteristics of coal tar cracking catalyst

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Low-Temperature Steam Reforming of Toluene and Biomass Tar over Biochar-Supported Ni Nanoparticles

Catalytic upgrading of gaseous tars over zeolite catalysts during coal pyrolysis

Catalytic upgrading of Naomaohu coal pyrolysis volatiles over NiAl and NiLiAl oxides

Study on Sulfur Conversion Characteristics in Catalytic Cracking of Coal Tar in the Presence of Dolomite-Supported Catalysts

Enhanced production of light tar from integrated process of in-situ catalytic upgrading lignite tar and methane dry reforming over Ni/mesoporous Y

Arming wood carbon with carbon-coated mesoporous nickel-silica nanolayer as monolithic composite catalyst for steam reforming of toluene

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

In Situ Catalytic Pyrolysis of Low-Rank Coal for the Conversion of Heavy Oils into Light Oils

Comparative evaluation of tar steam reforming over graphitic carbon supported Ni and Co catalysts at low temperature

Noble metal (Pt, Pd and Rh) promoted Ni-Co/Mg(Al)O catalysts for steam reforming of tar impurities from biomass gasification

Cracking Characteristics of Simulated Dust-Containing Coal Pyrolysis Volatiles over Regenerated Nickel-Based Catalysts

Maximizing production of high-quality tar from catalytic upgrading of lignite pyrolysis volatiles over Ni-xCe/Y under CH4/CO2 atmosphere

Pyrolysis municipal sludge char supported Fe/Ni catalysts for catalytic reforming of tar model compound