Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

Cracking Characteristics of Simulated Dust-Containing Coal Pyrolysis Volatiles over Regenerated Nickel-Based Catalysts

Study on regeneration characteristics and dust deposition mechanism of nickel based tar-cracking catalyst

Effect of Additives on Cracking Characteristics of Dust-Containing Tar over Nickel-Based Catalysts

Cracking characteristics of dust-containing tar over modified dolomite catalyst

Preparation and catalytic cracking characteristics of coal tar cracking catalyst

The study of coke resistance of Ni/ZrO2 by core-shell structure coupling with cobalt doping modification in CO2 reforming of tar

Study on Sulfur Conversion Characteristics in Catalytic Cracking of Coal Tar in the Presence of Dolomite-Supported Catalysts

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Coking and Regeneration of Nickel Catalyst for the Cracking of Toluene As a Tar Model Compound

Study on the mechanism of carbon nanotube-like carbon deposition in tar catalytic reforming over Ni-based catalysts

Nickel Loaded on Carbon Materials Prepared From Co-pyrolysis of Biochar and Caking Coal for Catalytic Conversion of Volatiles

Effect of Operating Conditions on the Coke Formation and Nickel Catalyst Performance During Cracking of Tar

Carbon Deposition and Sintering Characteristics on Iron-Based Oxygen Carriers in the Catalytic Cracking Process of Coal Tar

Three-dimensional porous carbon materials as catalysts for upgrading coal pyrolysis volatiles to boost light tar

In-situ catalytic cracking of coal pyrolysis tar coupled with steam reforming of ethane over carbon based catalyst

Biomass-Derived Bimetallic Ni-Fe Catalyst with Enhanced Tar Removal Performance

Pyrolysis of biomass Tar model compound with various Ni-based catalysts: Influence of promoters characteristics on hydrogen-rich gas formation

Catalytic Conversion of Tar from Hot Coke Oven Gas Using 1-Methylnaphthalene As a Tar Model Compound

Catalytic upgrading of Naomaohu coal pyrolysis volatiles over NiAl and NiLiAl oxides

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Maximizing production of high-quality tar from catalytic upgrading of lignite pyrolysis volatiles over Ni-xCe/Y under CH4/CO2 atmosphere