Abstract:Catalytic upgrading of volatiles is an essential technology to improve the product distribution of pyrolysis for the clean and efficient utilization of low-rank coals. In this work, novel acid-base bifunctional catalysts composed of Ni/Li/Al oxides were designed and prepared using LDH precursors with tunable chemical composition and structural properties. The catalysts were systematically characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), physisorption, NH 3 -temperature programmed desorption (NH 3 -TPD), CO 2 -temperature programmed desorption (CO 2 -TPD), H 2 -temperature programmed reduction (H 2 -TPR), and scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS). A two-stage fixed bed reactor was employed to evaluate the performance of the catalysts. Characterization results suggest that the crystal size of NiO and the surface area of the catalyst decreased with increasing Li content and decreasing Ni content in the catalyst, while the pore volume and pore diameter were positively correlated with Li content. Moreover, the addition of Li reduced the amount of weak acid sites and raised the amount of total basic sites. Consequently, the bifunctional catalysts boosted the yield of light tar and the contents of aromatics and phenols in tar. Specifically, with the highest total acid sites (569 μmol/g) promoting the cracking of heavy pitch components, Ni 2.5 Li 0.5 Al 1 decreased the content of pitch in tar to 23.8 wt%, representing a 42.7 % drop from the corresponding non-catalytic pyrolysis. Accordingly, it improved the light tar yield to 7.2 wt%, which was 18 % higher than non-catalytic pyrolysis. 450 °C is identified as a suitable temperature for the catalytic upgrading of volatiles from Naomaohu coal; higher catalysis temperatures at 500 °C and 550 °C led to lower tar yield and lower phenols content, along with higher gas yield and more carbon deposition.

In Situ Catalytic Pyrolysis of Low-Rank Coal for the Conversion of Heavy Oils into Light Oils

Three-dimensional porous carbon materials as catalysts for upgrading coal pyrolysis volatiles to boost light tar

Catalytic upgrading of Naomaohu coal pyrolysis volatiles over NiAl and NiLiAl oxides

Catalytic Pyrolysis of Naomaohu Coal Using Combined CaO and Ni/Olivine Catalysts for Simultaneously Improving the Tar and Gas Quality

Catalytic upgrading of gaseous tars over zeolite catalysts during coal pyrolysis

Ex‐situ catalytic fast pyrolysis of low‐rank coal over HZSM ‐5 and modified Mg/ HZSM ‐5 catalysts

Study on lightening of coal tar with metal oxide supported γ-Al2O3 catalyst

Catalytic pyrolysis of tar-rich coal for coal tar to light oil with catalysts of modified granulated blast furnace slag

Microwave-assisted metal-catalyzed pyrolysis of low-rank coal: Promising option towards obtaining high-quality products

Catalytic Upgrading of Coal Pyrolysis Volatiles by Porous Carbon Materials Derived from the Blend of Biochar and Coal

Catalytic conversion of coal pyrolysis vapors to light aromatics over hierarchical Y-type zeolites

Porous coal char-based catalyst from coal gangue and lignite with high metal contents in the catalytic cracking of biomass tar

Catalytic Pyrolysis of Bituminous Coal under Pyrolysis Gas over A Ni/Mgo Catalyst

Catalytic upgrading of coal volatiles with Fe2O3 and hematite by TG-FTIR and Py-GC/MS

Catalytic effect of industrial waste carbide slag on pyrolysis of low-rank coal

In-situ catalytic cracking of coal pyrolysis tar coupled with steam reforming of ethane over carbon based catalyst

Integrated Process of Coal Fast Pyrolysis in a Fluidized Bed Reactor with Reforming Reaction of Simulated Fuel Gas to Promote Light Tar Evolution

Effect of Atmosphere and Methane Catalytic Activation on Coal Pyrolysis in Fluidized Bed Reactor

Catalytic Influence of Iron Oxide (fe2o3) on Coal Pyrolysis and Char Combustion at Various Temperatures

Effect of Ni/Mo on the preparation of non-loaded NiMoSx catalysts and the hydrogenation performance of coal tar

Catalytic Fast Pyrolysis of Tar-Rich Coal with a Bauxite Residue for Upgrading High-Value Products: Product Distribution and Kinetic Analysis