Abstract:In the presence of a catalyst, the reforming of biomass tar to produce syngas, and its further use for chemical production, is a sustainable energy technology. However, to the best of our knowledge, the integration of tar reforming and downstream technology is still limited. In this work, an economical Ni/biochar catalyst was prepared and successfully applied for steam reforming of toluene (as a tar model compound) and syngas methanation. Under experimental conditions, the Ni/wheat straw (Ni/WS) char catalyst is active for syngas production and further for methane production in a wide temperature range. The physicochemical properties of the Ni/WS char catalyst were carefully characterized, and then the activity, stability, and deactivation of Ni/WS char in toluene reforming and methanation were elaborated. Ni/WS char possessed a smaller Ni crystallite size, and its lower activation energy resulted in higher toluene conversion (90.2%) and gas yield (261.4 mmol/gtoluene) compared with the commercial Ni/Al2O3 catalyst during toluene reforming. Furthermore, the produced syngas with an optimized H2/CO ratio of 3.01 was proved to be suitable for methane production over Ni/WS char, which therefore showed a high CO conversion (80.3%).The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c03497.Proximate and ultimate analyses of wheat straw; activity comparison and reaction conditions of different Ni-based catalysts in toluene reforming; activity comparison and reaction conditions of different Ni-based catalysts in CO methanation; weight changes of spent Ni/WSC-R and Ni/Al2O3-R at different temperatures and different S/C ratios; weight changes of spent Ni/WSC-R and Ni/Al2O3-R after 15 h TOS of SRT; TG curves of spent Ni/WSC-R and spent Ni/Al2O3-R (after 15 h TOS of SRT) and spent Ni/WSC-M and Ni/Al2O3-M (after 50 h TOS of methanation); weight changes of spent Ni/WSC-M and Ni/Al2O3-M at different temperatures and after 50 h TOS of methanation (PDF)This article has not yet been cited by other publications.

What problem does this paper attempt to address?

The main problems that this paper attempts to solve are the treatment of tar produced during the biomass gasification process and the effective utilization of syngas. Specifically, by developing an economical and highly - efficient Ni/biochar catalyst, the author aims to achieve the integration of the process from steam reforming of toluene (as a tar model compound) to produce syngas and further convert syngas into methane. The goal of this research is to increase the toluene conversion rate and gas yield during the tar reforming process, while optimizing the H₂/CO ratio in syngas to be suitable for subsequent methane production. ### Main research contents and methods: 1. **Catalyst preparation**: A highly - dispersed Ni/biochar catalyst was prepared by impregnation and one - step calcination methods. 2. **Experimental setup**: Experiments on toluene reforming and syngas methanation were carried out in two fixed - bed reactors respectively, and the experimental conditions included reaction temperature, steam - to - carbon ratio (S/C), etc. 3. **Performance evaluation**: The activity, stability and deactivation mechanism of the Ni/biochar catalyst in toluene reforming and syngas methanation were studied. ### Key findings: - **Toluene reforming**: At 600°C, the Ni/biochar catalyst exhibited a relatively high toluene conversion rate (90.2%) and gas yield (261.4 mmol/g toluene), and the H₂/CO ratio was 3.01, which was suitable for subsequent methane production. - **Syngas methanation**: Syngas with an optimized H₂/CO ratio (3.01) exhibited a relatively high CO conversion rate (80.3%) on the Ni/biochar catalyst. - **Catalyst stability**: Within 15 hours, the activity of the Ni/biochar catalyst decreased, but overall it was still superior to the commercial Ni/Al₂O₃ catalyst. ### Conclusion: By using the Ni/biochar catalyst, syngas produced by toluene reforming can be effectively further converted into methane, achieving effective treatment of biomass tar and efficient utilization of energy. This research provides new ideas and technical support for the sustainable development of biomass gasification technology. ### Formula display: - **Toluene conversion rate**: \[ T(\%)=\frac{[\text{toluene}]_{\text{in}} - [\text{toluene}]_{\text{out}}}{[\text{toluene}]_{\text{in}}}\times100 \] - **TOF (Turnover Frequency)**: \[ \text{TOF}(h^{-1})=\frac{0.028\times58.69}{21\times L_{\text{Ni}}\times D_{\text{Ni}}} \] - **CO conversion rate**: \[ X(\%)=\frac{[\text{CO}]_{\text{in}} - [\text{CO}]_{\text{out}}}{[\text{CO}]_{\text{in}}}\times100 \] - **CH₄ selectivity**: \[ S(\%)=\frac{[\text{CH}_4]_{\text{out}}}{[\text{CO}]_{\text{in}} - [\text{CO}]_{\text{out}}}\times100 \] These formulas are used to calculate the key parameters in the experiment and help evaluate the performance of the catalyst.

Direct Conversion of Syngas Produced from Steam Reforming of Toluene into Methane over a Ni/Biochar Catalyst

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Catalytic toluene steam reforming using Ni supported catalyst from pyrolytic peat

Carbon-coated mesoporous silica-supported Ni nanocomposite catalyst for efficient hydrogen production via steam reforming of toluene

Low-Temperature Steam Reforming of Toluene and Biomass Tar over Biochar-Supported Ni Nanoparticles

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Arming wood carbon with carbon-coated mesoporous nickel-silica nanolayer as monolithic composite catalyst for steam reforming of toluene

Steam reforming of biomass gasification tar over Ni-based catalyst supported by TiO2-SiO2 composite

The Efficiency of Carbon Conversion and Hydrogen Production from Tar Steam Reforming of Biomass Using Ni-Based Catalysts with Alkaline Earth Promoters

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Noble metal (Pt, Pd and Rh) promoted Ni-Co/Mg(Al)O catalysts for steam reforming of tar impurities from biomass gasification

Experimental study of Ni/MgO catalyst in carbon dioxide reforming of toluene, a model compound of tar from biomass gasification

Boosting syngas production from corncob tar reforming over Ni/MgAl hydrotalcite-derived catalysts

Catalytic performance of Mn-promoted Ni/MgO catalysts in CO 2 reforming of toluene used as model compound of tar produced from biomass: Influence of preparation methods

Conversion and syngas production of toluene as a biomass tar model compound in chemical looping reforming

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Steam reforming of biomass tar model compound over two waste char-based Ni catalysts for syngas production

Biomass Derived low concentration CO2 mixed Gas Combined Steam to Reform Methane through Ni based volcanic rock catalyst

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Bi-reforming of Methane with Carbon Dioxide and Steam on Nickel-Supported Binary Mg–Al Metal Oxide Catalysts

Methane Dry Reforming by Ni–Cu Nanoalloys Anchored on Periclase-Phase MgAlO x Nanosheets for Enhanced Syngas Production