Abstract:In the presence of a catalyst, the reforming of biomass tar to produce syngas, and its further use for chemical production, is a sustainable energy technology. However, to the best of our knowledge, the integration of tar reforming and downstream technology is still limited. In this work, an economical Ni/biochar catalyst was prepared and successfully applied for steam reforming of toluene (as a tar model compound) and syngas methanation. Under experimental conditions, the Ni/wheat straw (Ni/WS) char catalyst is active for syngas production and further for methane production in a wide temperature range. The physicochemical properties of the Ni/WS char catalyst were carefully characterized, and then the activity, stability, and deactivation of Ni/WS char in toluene reforming and methanation were elaborated. Ni/WS char possessed a smaller Ni crystallite size, and its lower activation energy resulted in higher toluene conversion (90.2%) and gas yield (261.4 mmol/gtoluene) compared with the commercial Ni/Al2O3 catalyst during toluene reforming. Furthermore, the produced syngas with an optimized H2/CO ratio of 3.01 was proved to be suitable for methane production over Ni/WS char, which therefore showed a high CO conversion (80.3%).The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c03497.Proximate and ultimate analyses of wheat straw; activity comparison and reaction conditions of different Ni-based catalysts in toluene reforming; activity comparison and reaction conditions of different Ni-based catalysts in CO methanation; weight changes of spent Ni/WSC-R and Ni/Al2O3-R at different temperatures and different S/C ratios; weight changes of spent Ni/WSC-R and Ni/Al2O3-R after 15 h TOS of SRT; TG curves of spent Ni/WSC-R and spent Ni/Al2O3-R (after 15 h TOS of SRT) and spent Ni/WSC-M and Ni/Al2O3-M (after 50 h TOS of methanation); weight changes of spent Ni/WSC-M and Ni/Al2O3-M at different temperatures and after 50 h TOS of methanation (PDF)This article has not yet been cited by other publications.

Conversion and syngas production of toluene as a biomass tar model compound in chemical looping reforming

In-situ removal of toluene as a biomass tar model compound using NiFe2O4 for application in chemical looping gasification oxygen carrier

Evaluation of Different Oxygen Carriers for Chemical Looping Reforming of Toluene as Tar Model Compound in Biomass Gasification Gas: A Thermodynamic Analysis

Enhanced Reforming of Mixed Biomass Tar Model Compounds Using a Hybrid Gliding Arc Plasma Catalytic Process

Chemical looping gasification of benzene as a biomass tar model compound using hematite modified by Ni as an oxygen carrier

Chemical Looping Partial Oxidation (CLPO) of Toluene on LaFeO3 Perovskites for Tunable Syngas Production

Multi-function of oxygen carrier for in-situ tar removal in chemical looping gasification: Naphthalene as a model compound

Research on reaction mechanisms on chemical looping gasification of naphthalene over NiFe 2 O 4 for syngas production: An experimental and theoretical study

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Direct Conversion of Syngas Produced from Steam Reforming of Toluene into Methane over a Ni/Biochar Catalyst

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Experimental study of Ni/MgO catalyst in carbon dioxide reforming of toluene, a model compound of tar from biomass gasification

Chemical-looping gasification of biomass: Part II. Tar yields and distributions

Enhanced H 2 -Rich Gas Production via Steam Reforming of Toluene over Ni-Based Hydrotalcite-Derived Catalysts at Low Temperature

Steam reforming of toluene as biomass tar model compound in a gliding arc discharge reactor

Microwave reforming with char-supported Nickel-Cerium catalysts: A potential approach for thorough conversion of biomass tar model compound

Upgraded Syngas Through Selective Partial Oxidation of Tar Using Ni-doped LaFeO3 with Tuned Oxidation Potential

A Novel Hybrid Iron-Calcium Catalyst/absorbent for Enhanced Hydrogen Production Via Catalytic Tar Reforming with In-Situ CO2 Capture

Enhanced hydrogen production via catalytic toluene reforming with in situ carbon dioxide capture: Effects of a hybrid iron-calcium composite prepared by impregnation

Catalytic Decomposition of Toluene over Fe2O3 Nanocluster During Chemical Looping Gasification (CLG): ReaxFF MD Approach

Experimental and kinetic modeling study of tar partial oxidative reforming by dielectric barrier discharge plasma using toluene as a model compound