Abstract:One of the main advantages of chemical looping gasification (CLG) in comparison to conventional gasification technologies is its potential to enhance in situ tar removal. This is due to the catalytic properties of the oxygen carrier used in the CLG process, which can facilitate tar oxidation, cracking, and reforming reactions under specific operating conditions. Furthermore, this catalytic effect can be harnessed to convert hydrocarbons (C1–C3), thereby increasing syngas production during the process. In this study, the catalytic activity of eight different oxygen carriers (two ores, two wastes, and four synthetic materials) was examined in a batch fluidized bed reactor. The reactions were mainly conducted at three temperatures (850, 900, and 950 °C), utilizing benzene and ethylene as model compounds. The results revealed that the ores and wastes exhibited a low catalytic effect over benzene and ethylene conversion at low temperatures, although this effect was increased with a rising temperature. Conversely, the synthetic materials demonstrated higher catalytic activity in the benzene and ethylene conversion reactions, which also increased with higher temperatures. It should be noted that the Cu/Al oxygen carrier achieved nearly complete conversion of benzene and ethylene at temperatures exceeding 900 °C. Methane production was observed in most of the experiments, indicating its role as an intermediate in the conversion of tar byproducts. Additionally, the Cu/Al oxygen carrier exhibited a promising catalytic performance in methane conversion. These findings highlight the potential of certain synthetic oxygen carriers, such as the Cu/Al oxygen carrier, to serve as effective catalysts for the removal of tar byproducts and light hydrocarbons during CLG processes.

Chemical Looping Partial Oxidation (CLPO) of Toluene on LaFeO3 Perovskites for Tunable Syngas Production

Conversion and syngas production of toluene as a biomass tar model compound in chemical looping reforming

In-situ removal of toluene as a biomass tar model compound using NiFe2O4 for application in chemical looping gasification oxygen carrier

Evaluation of Different Oxygen Carriers for Chemical Looping Reforming of Toluene as Tar Model Compound in Biomass Gasification Gas: A Thermodynamic Analysis

Upgraded Syngas Through Selective Partial Oxidation of Tar Using Ni-doped LaFeO3 with Tuned Oxidation Potential

Simultaneous in-situ tar abatement and H2-enriched syngas production via heterogeneous doping of LaFeO3 during chemical looping gasification of microalgae

Catalytic Decomposition of Toluene over Fe2O3 Nanocluster During Chemical Looping Gasification (CLG): ReaxFF MD Approach

Catalytic Activity of Oxygen Carriers on the Removal of Tar Byproducts for Biomass Chemical Looping Gasification Application

Chemical-looping gasification of biomass: Part II. Tar yields and distributions

Syngas Production by Fe2SiO4 Oxygen Carrier in Chemical Looping Partial Oxidation of Methane

Multi-function of oxygen carrier for in-situ tar removal in chemical looping gasification: Naphthalene as a model compound

High-Quality Syngas Production by Chemical Looping Gasification of Bituminite Based on NiFe2O4 Oxygen Carrier

Minimizing tar formation whilst enhancing syngas production by integrating biomass torrefaction pretreatment with chemical looping gasification

Optimization of Chemical Looping Pyrolysis System of Coal Tar by Combined Simulation and Experiments

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

Chemical Looping Reforming for Syngas Production with Co-Conversion of CH4 and CO2 by Using Ilmenite Ore As Both Oxygen Carrier and Catalyst

Highly efficient and durable syngas production over one-step synthesized synergistic oxygen carriers in biomass chemical looping gasification

Research on reaction mechanisms on chemical looping gasification of naphthalene over NiFe 2 O 4 for syngas production: An experimental and theoretical study

Sorption-enhanced Steam Reforming of Toluene Using Multifunctional Perovskite Phase Transition Sorbents in a Chemical Looping Scheme

Chemical looping gasification of benzene as a biomass tar model compound using hematite modified by Ni as an oxygen carrier