Abstract:Chemical looping gasification (CLG) is considered as a novel gasification technology because gas-phase oxygen of the gasifying medium can be replaced by lattice oxygen of the oxygen carrier. The gasifying mediums (e.g., pure O-2 and steam) used as the oxygen source can apparently improve the char conversion in traditionally biomass gasification. Similarly, the objective of this study is to investigate char CLG with the oxygen carrier as an individual oxygen source. A NiO-modified iron ore oxygen carrier was prepared by the impregnation method coupled with ultrasonic treatment. The characteristics of the oxygen carrier were analyzed by an X-ray diffractometer (XRD) and H-2 temperature-programmed reduction (H-2-TPR). The formation of spinel-type nickel iron oxide NiFe2O4 can evidently enhance the reactivity of the oxygen carrier. The reduction of the oxygen carrier by biomass char was investigated using thermogravimetric analysis (TGA) together with a fixed-bed reactor under an inert atmosphere. TGA tests show that the reactivity of the oxygen carrier increased with the increase of NiO loading. An optimal mass ratio of char/oxygen carrier is determined at 4:6 With the aim of obtaining a maximum reaction rate. The presence of spinel-type nickel iron oxide NiFe2O4 apparently improved the reaction rate of char gasification. The fixed-bed gasification results show that CO was generated faster than other components because carbon was partially oxidized and H-2 was quickly consumed by the lattice oxygen [O] of the oxygen carrier. A relatively high carbon conversion of 55.56% was obtained in the char CLG, in comparison to that of char pyrolysis (5.52%). The lattice oxygen [O] of the oxygen carrier was fully consumed by biomass char. Moreover, biomass char was catalytically, pyrolyzed becausee the deep reduction products (metallic iron and nickel) can act as catalysts for char pyrolysis. XRD analysis shows that the oxygen carrier was deeply reduced into Fe (Ni) alloy and Fe3C species during the reduction stage of Char CLG. However, the. regenerated oxygen carrier after oxidation can be recycled for char CLG on the basis of XRD and scanning electron microscopy (SEM) analyses.

Highly efficient and durable syngas production over one-step synthesized synergistic oxygen carriers in biomass chemical looping gasification

Syngas production via chemical looping reforming biomass pyrolysis oil using NiO/dolomite as oxygen carrier, catalyst or sorbent

Hydrogen-rich syngas production with tar elimination via biomass chemical looping gasification (BCLG) using BaFe2O4/Al2O3 as oxygen carrier

Performance evaluation of carbon-negative syngas production via chemical looping reforming of methane from biomass pyrolysis volatiles

Enhanced oxygen activity of LaFeO 3 oxygen carriers in biomass chemical looping gasification coupled with CO 2 /H 2 O splitting by fragmented flaky structure

Enhanced stability of iron-nickel oxygen carriers in biomass chemical looping gasification by core-shell structure

High-Quality Syngas Production by Chemical Looping Gasification of Bituminite Based on NiFe2O4 Oxygen Carrier

Chemical looping gasification of biomass using rare earth oxides doped ferric oxide oxygen carrier for hydrogen‐rich syngas production

Hydrogen-rich syngas production from straw char by chemical looping gasification: The synergistic effect of Mn and Fe on Ni-based spinel structure as oxygen carrier

Oxygen uncoupling chemical looping gasification of biomass over heterogeneously doped La-Fe-O perovskite-type oxygen carriers

Syngas Production by Fe2SiO4 Oxygen Carrier in Chemical Looping Partial Oxidation of Methane

Experimental Investigation of Fe–Ni–Al Oxygen Carrier Derived from Hydrotalcite-like Precursors for the Chemical Looping Gasification of Biomass Char

Chemical looping pyrolysis-gasification of biomass for high H2/CO syngas production

Chemical looping reforming of biomass based pyrolysis gas coupling with chemical looping hydrogen by using Fe/Ni/Al oxygen carriers derived from LDH precursors

Iron oxide supported on silicalite-1 as a multifunctional material for biomass chemical looping gasification and syngas upgrading

Chemical Looping Gasification of Biomass Char Using Iron Ore As an Oxygen Carrier

Syngas production from cellulose solid waste by enhanced chemical looping gasification using Ca-Fe bimetallic oxygen carrier with porous structure

Thermodynamic analysis and kinetic investigations on biomass char chemical looping gasification using Fe-Ni bimetallic oxygen carrier

Effects of B-site substitution of SrFe2O4 oxygen carrier on the biomass chemical looping gasification performance

Hydrogen-rich syngas production from chemical looping gasification of lignite by using NiFe2O4 and CuFe2O4 as oxygen carriers

Inhibition strategies for phase separation of iron-based oxygen carriers in chemical looping gasification- enhanced oxygen transport efficiency through oxide-support interactions