Iron oxide supported on silicalite-1 as a multifunctional material for biomass chemical looping gasification and syngas upgrading

Xin Li,Lijun Wang,Bo Zhang,Afsaneh Khajeh,Abolghasem Shahbazi
DOI: https://doi.org/10.1016/j.cej.2020.125943
IF: 15.1
2020-12-01
Chemical Engineering Journal
Abstract:<p>Iron oxide supported on silicatite-1 was synthesized as a novel oxygen carrier for biomass chemical looping gasification (BCLG) with additional functionalities of its reduced form as a catalyst for tar decomposition and an adsorbent for capturing CO<sub>2</sub> in syngas. The temperature-programmed-reduction/oxidation profiles showed that the iron oxide supported on silicatite-1 had lower reduction and oxidation temperatures than the iron oxide supported on conventional silica. It was found the iron oxide supported on silicatite-1 was resistant to the formation of strong metal-support interaction and irreversible silicate in the temperature range of 650–1000 °C and exhibited high thermal/chemical stability in a cyclic process. The experimental results showed that at 900 °C, the temperature which maximize the gaseous products, the syngas contained only 0.6% C<sub>1</sub>-C<sub>4</sub> hydrocarbons/oxygenates, 3.5% one-ring aromatics, 5.7% heavier hydrocarbons/oxygenates, and 13.2% steam, meanwhile the overall selectivity towards CO<sub>2</sub> and CO was 77.0%. The cracking conversion of toluene over the 15Fe/S-1 was 34.8% at 700 °C. The iron supported on siliclaite-1 had a better catalytic activity in tar decomposition than the iron on a conventional silica support as the silicalite-1 had higher surface area and showed better metal dispersion. As an adsorbent for CO<sub>2</sub> capture, the reduced oxygen carrier with 15% Fe had a 1.01 mmol/g CO<sub>2</sub> adsorption capacity at 30 °C under 1 bar, which is comparable to other CO<sub>2</sub> adsorbents reported in literature. Therefore, the iron oxide supported on silicatite-1 is an effective looping material as an oxygen carrier for biomass gasification, a catalyst for tar decomposition and an adsorbent for CO<sub>2</sub> capture.</p>
engineering, chemical, environmental
What problem does this paper attempt to address?