Ba-Al-decorated iron ore as bifunctional oxygen carrier and HCl sorbent for chemical looping combustion of syngas

Guicai Liu,Haiming Wang,Severin Deplazes,Andrei Veksha,Christian Wirz-Toendury,Apostolos Giannis,Teik Thye Lim,Grzegorz Lisak

DOI: https://doi.org/10.1016/j.combustflame.2020.09.021

IF: 4.4

2021-01-01

Combustion and Flame

Abstract:The simultaneous high-temperature HCl removal and chemical looping combustion (CLC) of syngas over barium-decorated oxygen carriers (OCs) was investigated. An iron ore was coated with a layer of sorbent (5 wt%) containing Ba and Al compounds (molar ratios Al:Ba = 0.5, 2.0, 4.5, 8.0, 12) and used for model syngas combustion at 800 degrees C. It was found that the synthesized materials can effectively remove HCl from the syngas. The HCl removal capacity increased with the Ba loading, and the HCl breakthrough capacity can reach 0.0345 mmol/g for the OC with Al:Ba = 0.5, resulting in the formation of BaCl2. The conversion of Ba species into BaCl2 was 17.3%. Besides the HCl sorption, the coating with Ba and Al compounds enhanced the activity of lattice oxygen and improved the reducibility of OCs during CLC due to the Ba-Fe composite formed on the OCs surface. Compared to the iron ore, the combustion efficiencies of the coated OC with Al:Ba = 4.5 for CO and H-2 increased from 62.2% and 87.2% to 99.6% and 95.9%, respectively. Through fluidized bed experiments and thermodynamic calculations, the feasibility of sorbent regeneration was demonstrated by treating OCs with a mixture of CO2 and H2O at 80 0-1000 degrees C. The HCl desorption rate increased with temperature and nearly complete sorbent regeneration (99.6%) could be achieved at 1000 degrees C. These findings demonstrate that Ba-Al-decorated iron ore can be used as bifunctional material in CLC process since it enables simultaneous high-temperature HCl removal and syngas combustion. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.