An Innovative Cu-Al Oxygen Carrier for the Biomass Chemical Looping Gasification Process

Ivan Samprón,Arturo Cabello,Francisco García-Labiano,Maria Teresa Izquierdo,Luis F. de Diego

DOI: https://doi.org/10.2139/ssrn.4235932

2022-01-01

SSRN Electronic Journal

Abstract:Biomass Chemical Looping Gasification (BCLG) is a novelty technology which enables the production of renewable syngas without the need for external power supply and achieving negative carbon emissions. In this work, the behavior of a synthetic Cu-based (14 wt% CuO) oxygen carrier, Cu14Al_ICB, was tested during 45 h in a 1.5 kW th continuous unit using pine sawdust as fuel. The effect of oxygen-to-fuel ratio (λ) and gasification temperature on syngas composition and gasification parameters, such as fuel conversion, carbon capture, cold gas efficiency, and syngas yield, was studied. The decrease of oxygen-to-fuel ratio increased the concentration of H 2 and CO, while the increase in gasification temperature mainly improved char gasification, also promoting H 2 and CO generation. High amounts of syngas with low CH 4 concentrations (~2.3 mol CH 4 /kg of dry biomass) were obtained at any condition due to the catalytic effect of metallic copper on CH 4 reforming reactions. Values of syngas yield close to the obtained with Ni-based solids were achieved. The oxygen carrier also had a high effect on tar removal, reaching tar concentration values similar to those obtained by operating under Chemical Looping Combustion conditions. A particle lifetime of ~8000 h was inferred for this oxygen carrier, which is the highest lifetime obtained so far for an oxygen carrier working under BCLG conditions. In addition, the mechanical properties, reactivity and oxygen transport capacity were maintained during the campaign. Therefore, the Cu14Al_ICB oxygen carrier has proven to be an excellent material for the BCLG process.