Identifying the roles of MFe2O4 (M=Cu, Ba, Ni, and Co) in the chemical looping reforming of char, pyrolysis gas and tar resulting from biomass pyrolysis
Jing Chen,Kun Zhao,Zengli Zhao,Fang He,Zhen Huang,Guoqiang Wei
DOI: https://doi.org/10.1016/j.ijhydene.2018.12.216
IF: 7.2
2019-02-01
International Journal of Hydrogen Energy
Abstract:Biomass chemical looping gasification (BCLG), which employs oxygen carriers (OCs) as the gasification agent, is drawing more attention for its low cost and environmental friendliness. However, the complex products of biomass pyrolysis and the reactions between OCs and the pyrolysis products constrain its development. In this study, MFe2O4 (M = Cu, Ba, Ni and Co) ferrites synthesized via the sol-gel method were investigated as OCs in BCLG for hydrogen-rich syngas production. The properties of the as-prepared and spent OCs were characterized by X-ray diffraction (XRD), H2-temperature programmed reduction (TPR), scanning electron microscopy (SEM), and automatic surface area porosimetry (BET). The three-phase products (char, pyrolysis gas and toluene) derived from biomass pyrolysis were employed as the reactants to investigate the reactivity of the ferrites. Then, BCLG experiments using biomass were conducted on the four ferrites to further determine their performance. The characterization results suggested that the four ferrites are all attractive for the chemical looping process, exhibiting good oxygen transferability and wide distributions of metal cations because of their metal synergistic effects in the spine structure. Reactions with pyrolysis gas and biomass char indicated that BaFe2O4 has a higher reactivity via a solid-solid reaction but a lower reactivity with pyrolysis gas, which make it very favorable for the production of hydrogen-rich syngas. Furthermore, BaFe2O4 showed excellent performance for toluene catalytic cracking with small amounts of carbon deposition. The synergetic effects between Ba and Fe metals considerably enhanced selective oxidation to produce 26.72% more H2 than CoFe2O4 and 13.79% more H2 than NiFe2O4 and CuFe2O4 for biomass gasification. The hydrogen yield produced by BaFe2O4 with the assistance of steam for biomass gasification can reach 41.8 mol/kg of biomass.
energy & fuels,electrochemistry,chemistry, physical