Abstract:The removal of generated tar during the biomass gasification is a serious issue. Catalytic tar cracking is one of the most efficient methods to reduce tar deposition while many common tar cracking catalysts suffer problems of serious carbon deposition and active metal sintering, especially at low temperatures. Therefore, developing catalysts with both high activity and stability is critical. In this work, we aim to prepare catalysts with a high active metal contents, a small metal particle size and a high dispersion to contribute to the highly efficient tar removal at relatively low temperatures. By adjusting the type and the concentration of the Co precursor solution when lignite is used as the carbon precursor, we prepared a series of catalysts which were then applied for both activity and stability test of the steam reforming of model tar and biomass tar. The results show that Co 0.15 -C 2 H 3 O 2 − prepared with a 0.15 M solution of Co(C 2 H 3 O 2 ) 2 ·4H 2 O achieves a Co content of about 16.0 wt% with an average particle size of about 3.77 nm and a relatively high metallic Co dispersion. For steam reforming of toluene, the catalyst achieves an almost 100 % toluene conversion at 400 °C and exhibits a high stability in the 100 h test. Moreover, Co 0.15 -C 2 H 3 O 2 − , which produces approximately 283.8 mL.g corncob −1 .g cat −1 .h −1 H 2 catalytically, is also active and stable in biomass tar cracking. The catalyst prepared in the present study by using the economic and simple ion-exchange method also has a well-dispersed nano-metal-loaded structure and can efficiently remove the tar at a low temperature with a high stability, which will contribute to the industrial application in the future.

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

Study On The Deactivation And Activity Regeneration Of Catalyst In Biomass Tar Cracking

Deactivation and Burning Regeneration of Coked Acid Catalysts in Catalytic Cracking Process of Biomass Tar

Effects of Catalytic Cracking Conditions on Biomass Tar Cracking

Effects of Solid Acid and Alkali Catalysts on Catalytic Cracking of Biomass Tar

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Evolution characteristics of different types of coke deposition during catalytic removal of biomass tar

Influence of Catalytic Cracking of Tar on Gas Component

In-Situ Catalytic Upgrading of Tar and Coke During Biomass/Coal Co-pyrolysis

Investigation of Coke Deposition During Catalytic Cracking of Different Biomass Model Tar: Effect of Microwave

Secondary Tar Components in the Catalytic Cracking Process of Biomass Tar

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Preparation of highly dispersed lignite-char-supported cobalt catalyst for stably steam reforming of biomass tar at low temperature

PERFORMANCE OF CATALYTIC CRACKING OF BIOMASS TAR

Effect of Operating Conditions on the Coke Formation and Nickel Catalyst Performance During Cracking of Tar

Catalytic Effect of Alkali Metals on the Gasification Dissolution Reaction and Deep Reaction Behavior of Metallurgical Cokes.

Catalytic Materials Based on the Catalytic Cracking of Biomass Tar

The Activity Regeneration of Deactivate Calcium Oxide With Coking