Abstract:The coal fast pyrolysis/circulating fluidized bed combustion/catalytic reactor coupled fractionation conversion process is easy to operate and maintain, with significant economic benefits, which is one of the effective ways to achieve clean and efficient utilization of coal resources. However, due to the poor tar quality and high pollution element content produced by the rapid coal pyrolysis process, the catalyst is frequently deactivated and regenerated. Therefore, a cheap and efficient non regenerative catalyst has been prepared in this paper. The effects of calcination temperature and modification method of catalyst on the catalytic cracking characteristics of coal tar were investigated in a fixed bed catalytic reactor with low-temperature coal tar as raw material and natural dolomite as research object. The 1% Ni/2%Fe dolomite catalyst was prepared under the optimum preparation conditions, and the effect of reaction temperature on the catalytic cracking of coal tar was investigated. The results show that with the increase of calcination temperature, the main components of dolomite, such as CaCO 3 and MgCO 3 is promoted to convert into CaO and MgO active substances, and the activity of natural dolomite catalyst gradually increases and tends to be stable, with the optimal calcination temperature of 750 ℃. The cracking of tar is not promoted by introducing Fe alone, but the catalytic activity of natural dolomite catalyst is significantly improved by introducing Ni and Fe at the same time. The best modification method is 1% Ni/2% Fe dolomite. The introduction of Fe as a promoter protects the sulfur poisoning deactivation of the active component Ni, while the introduction of Ni and Fe alleviates the sintering phenomenon of the catalyst. Fe can be used as an auxiliary agent to slow down the generation of carbon deposits in the catalytic process. The dolomite catalyst modified by Ni promotes the cracking of aliphatic compounds and sulfur-containing compounds. Indene and naphthalene compounds do not undergo cracking reactions, but products such as hydroindene and hydronaphthalene appear.

Study On The Deactivation And Activity Regeneration Of Catalyst In Biomass Tar Cracking

Deactivation and Burning Regeneration of Coked Acid Catalysts in Catalytic Cracking Process of Biomass Tar

Experimental Investigation on Catalyst Deactivation in Catalytic Cracking of Biomass Tar

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites

Catalytic Materials Based on the Catalytic Cracking of Biomass Tar

Effects of Solid Acid and Alkali Catalysts on Catalytic Cracking of Biomass Tar

Study on regeneration characteristics and dust deposition mechanism of nickel based tar-cracking catalyst

Understandings of Catalyst Deactivation and Regeneration during Biomass Tar Reforming: A Crucial Review

The Activity Regeneration of Deactivate Calcium Oxide With Coking

INVESTIGATION OF CATALYTIC DEACTIVITY AND ACTIVITY REGENERATION OF CIRCULATING ASH OF CFBB IN TAR CRACKING REACTIONS

Reactivity and Regeneration of Light Hydrocarbon Cracking Catalyst

Influence of Catalytic Cracking of Tar on Gas Component

Effects of Catalytic Cracking Conditions on Biomass Tar Cracking

Study on the mechanism of carbon nanotube-like carbon deposition in tar catalytic reforming over Ni-based catalysts

Preparation and catalytic cracking characteristics of coal tar cracking catalyst

Mechanism of in-situ dynamic catalysis and selective deactivation of H2O-activated biochar for biomass tar reforming

Analysis of the Coke Precursor on Bio-oil Refining Catalyst and the Regeneration of the Deactivated Catalyst

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Carbon Deposit Analysis in Catalyst Deactivation, Regeneration, and Rejuvenation.

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis