Abstract:This research focused on the reaction features and kinetics of tar catalytic conversion by char based on the generation and evolution of gas products. To probe the roles of heat and catalysis in tar conversion, a micro fluidized bed reaction analyzer (MFBRA) was used to assess tar thermal cracking (TC) and catalytic cracking (CC) by char at 1073, 1123, 1173, and 1223 K. The tar cracking behavior of the individual gas components (H 2 , CO, CO 2 , and CH 4 ), generation rates, and reaction kinetics were thoroughly investigated. The results show that TC and CC included a fast (Stage-1) and slow (Stage-2) conversion stage, in which Stage-1 contributed more than 80% of the total conversion. Compared to TC, tar CC required a longer reaction time but obtained higher conversions to individual gas components and the total gas products. The final conversion ratios ( X CC/TC ) of H 2 , CO, CO 2 , and CH 4 were kept above 1 at the tested temperature. The char catalytic action was very remarkable, especially at low temperatures. In tar CC, the generation rate of individual gas components slowly declined after quickly reaching the peak, forming a relatively stable zone. The volume reaction model (VRM) well described the tar conversion behavior with and without char. Compared to TC, char lowered the activation energy ( Ea ) of gas generation. For individual gas components (H 2 , CO, CO 2 , CH 4 ) and the total gas products, the corresponding reduction degree of Ea was 25.56%, 24.18%, 22.14%, 4.75%, and 21.71%, respectively, further displaying the promoting impact of char. The evaluated generation features and kinetics of individual components in the gas products will benefit the in-situ tar removal in the biomass gasification process.

Catalytic Materials Based on the Catalytic Cracking of Biomass Tar

Advance in the treatment methods of biomass tar

Plasma-Catalytical Removal of Tars from Fuel Gas Obtained by Biomass Gasification

Catalytic tar conversion and the prospective use of iron-based catalyst in the future development of biomass gasification: a review

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

Study on industrial application of tar cracking in biomass gasification

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Recent Advances in Catalyst Technology for Biomass Tar Model Reforming: Thermal, Plasma and Membrane Reactors

Influence of Catalytic Cracking of Tar on Gas Component

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites

Experimental Study on Novel Biomass Gasification Reactor Integrated with Tar Catalytic Cracking

Investigation into Biochar Supported Fe-Mo Carbides Catalysts for Efficient Biomass Gasification Tar Cracking

Characteristics and Kinetics of In-Situ Catalytic Cracking of Biomass Tar in a Micro Dual Bed Reactor

Catalytic Cracking of Biomass Tar Using Ni Nanoparticles Embedded Carbon Nanofiber/porous Carbon Catalysts

Catalytic activity evaluation and deactivation progress of red mud/carbonaceous catalyst for efficient biomass gasification tar cracking

Understandings of Catalyst Deactivation and Regeneration during Biomass Tar Reforming: A Crucial Review

Recent progress of the transition metal-based catalysts in the catalytic biomass gasification: A mini-review

Study On The Deactivation And Activity Regeneration Of Catalyst In Biomass Tar Cracking

Catalytic performance of activated lignite chars on biomass tar cracking

Heterogeneous Cracking Reaction of Tar over Biomass Char, Using Naphthalene As Model Biomass Tar