Abstract:Fiber lasers, especially single-frequency fiber lasers, are highly desirable due to their long coherent length and narrow spectral linewidth that are unattainable in common photonic devices. However, significant challenges in the fabrication of high quality fiber laser devices still exist. In this paper, fibers with 1.55 m laser output have been achieved using Er3+/Yb3+-codoped glass-ceramic (GC) as a core material and a molten core fiber-drawing technique. The prepared GC fibers demonstrate enhanced laser output with an optical signal-to-noise ratio of 65 dB and a slope efficiency of 11.8%, which are higher than those of the as-prepared glass fiber. Furthermore, a single-longitudinal mode laser with a linewidth of 7.4 kHz and a relative intensity noise (RIN) of -148.8 dB/Hz is achieved, manifesting the potential applications of the GC fibers in optoelectronic fields. Theoretical calculations and simulations are employed to understand the relation between the optical performance of the fiber laser and the atomic structure in the phase-separated region of the oxyfluoride glass cores. The demonstrated GC fibers provide a new platform for the development of multifunctional fiber lasers and open a new avenue towards practical applications for crystallized fibers.

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

Low-Threshold Microlaser in Er : Yb Phosphate Glass Coated Microsphere

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Efficient single-frequency Tm:YAG crystal-derived silica fiber laser at 1.7 μm

Sub-kHz linewidth 1.6-μm single-frequency fiber laser based on a heavily erbium-doped silica fiber

208 W single-frequency 1064 nm laser based on a single-crystal fiber master-oscillator power amplifier

145 W single-frequency fiber laser at 1607 nm with the seed and MOPA configuration

Paving way for fabrication of silica-based single -frequency seed laser: Ultrahighly Yb-doped optical fibers via sol-gel method combined with silica tube inner wall coating and fusion-tapering technique

Enhanced single-mode fiber laser emission by nano-crystallization of oxyfluoride glass-ceramic cores

High-efficiency, single-frequency, polarized thulium-doped silica fiber lasers

Laser-Diode-Pumped Nd:YAP Single Crystal Fiber Laser

Yb/Ce Codoped Aluminosilicate Fiber With High Laser Stability for Multi-kW Level Laser

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Multi‐component yttrium aluminosilicate ( YAS ) fiber prepared by melt‐in‐tube method for stable single‐frequency laser

Yttrium Aluminosilicate (YAS) Fiber with Heavily Doped of Nd for Single Frequency Laser

Single-frequency linear cavity erbium-doped fiber laser for fiber-optic sensing applications

Single-crystal YAG Fiber Optics for the Transmission of High Energy Laser Energy

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Broadband wavelength-swept Cr^4+:YAG crystal fiber laser

1.6 μm tunable and switchable single-frequency erbium-doped fiber laser