Abstract:The focus of this study was the development of a second generation of fiber lasers internally cooled by anti-Stokes fluorescence. The laser consisted of a length of a single-mode fiber spliced to fiber Bragg gratings to form the optical resonator. The fiber was single-moded at the pump (1040 nm) and signal (1064 nm) wavelengths. Its core was heavily doped with Yb, in the initial form of CaF 2 nanoparticles, and co-doped with Al to reduce quenching and improve the cooling efficiency. After optimizing the fiber length (4.1 m) and output-coupler reflectivity (3.3%), the fiber laser exhibited a threshold of 160 mW, an optical efficiency of 56.8%, and a radiation-balanced output power (no net heat generation) of 192 mW. On all three metrics, this performance is significantly better than the only previously reported radiation-balanced fiber laser, which is even more meaningful given that the small size of the single-mode fiber core (7.8-µm diameter). At the maximum output power (∼2 W), the average fiber temperature was still barely above room temperature (428 mK). This work demonstrates that with anti-Stokes pumping, it is possible to induce significant gain and energy storage in a small-core Yb-doped fiber while keeping the fiber cool.

Multi‐component yttrium aluminosilicate ( YAS ) fiber prepared by melt‐in‐tube method for stable single‐frequency laser

Yttrium Aluminosilicate (YAS) Fiber with Heavily Doped of Nd for Single Frequency Laser

The Preparation of Yttrium Aluminosilicate (YAS) Glass Fiber with Heavy Doping of Tm3+ from Polycrystalline YAG Ceramics

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

A Yttrium Aluminosilicate Glass Fiber with Graded Refractive Index Fabricated by Melt‐in‐tube Method

Yb-Doped Aluminophosphosilicate Laser Fiber

Paving way for fabrication of silica-based single -frequency seed laser: Ultrahighly Yb-doped optical fibers via sol-gel method combined with silica tube inner wall coating and fusion-tapering technique

Growth and Characterization of Yb:Ho:YAG Single Crystal Fiber

Efficient single-frequency Tm:YAG crystal-derived silica fiber laser at 1.7 μm

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Yb/Ce Codoped Aluminosilicate Fiber With High Laser Stability for Multi-kW Level Laser

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

Single-crystal YAG Fiber Optics for the Transmission of High Energy Laser Energy

Yb 3+ -Doped 200 Μm Diameter Core, Gain Guided Index-Antiguided Fiber

The first demonstration of wavelength-tunable Yb 3+ -doped low silica calcium aluminosilicate (LSCAS) glass lasers

High Water-Resistant and Thermal Stable Fluoride Fibers for Mid-Infrared Laser

Yb 3+ doped fluorophosphate laser glasses with high gain coefficient and improved laser property

High-Efficiency Radiation-Balanced Yb-Doped Silica Fiber Laser With 200-mW Output

Double-clad large-mode-area polarization-maintaining ytterbium doped photonic crystal fiber