Abstract:In order to address the 'capacity crisis' caused by the narrow bandwidth of the current C band and the demand for wide-spectrum sensing sources and tunable fiber lasers, a broadband luminescence covering the C + L bands using Er3+/Yb3+ co-doped fluorotellurite glass fiber is investigated in this paper. The optimal doping concentrations in the glass host were determined based on the intensity, lifetime, and full width at half maximum (FWHM) of the fluorescence centered at 1.5 µm, which were found to be 1.5 mol% Er2O3 and 3 mol% Yb2O3. We also systematically investigated this in terms of optical absorption spectra, absorption and emission cross-sections, gain coefficients, Judd-Ofelt parameters, and up-conversion fluorescence. The energy transfer (ET) mechanism between the high concentrations of Er3+ and Yb3+ was summarized. In addition, a step-indexed fiber was prepared based on these fluorotellurite glasses, and a wide bandwidth of ~112.5 nm (covering the C + L bands from 1505.1 to 1617.6 nm) at 3 dB for the amplified spontaneous emission (ASE) spectra has been observed at a fiber length of 0.57 m, which is the widest bandwidth among all the reports based on tellurite glass. Therefore, this kind of Er3+/Yb3+ co-doped fluorotellurite glass fiber has great potential for developing broadband C + L band amplifiers, ultra-wide fiber sources for sensing, and tunable fiber lasers.

High ytterbium concentration Yb/Al/P/Ce co-doped silica fiber for 1-μm ultra-short cavity fiber laser application

Low-Threshold Microlaser in Er : Yb Phosphate Glass Coated Microsphere

Yb/Ce Codoped Aluminosilicate Fiber With High Laser Stability for Multi-kW Level Laser

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Paving way for fabrication of silica-based single -frequency seed laser: Ultrahighly Yb-doped optical fibers via sol-gel method combined with silica tube inner wall coating and fusion-tapering technique

Yb-Doped Aluminophosphosilicate Laser Fiber

Multi‐component yttrium aluminosilicate ( YAS ) fiber prepared by melt‐in‐tube method for stable single‐frequency laser

Growth and Characterization of Yb:Ho:YAG Single Crystal Fiber

Yb-doped large-mode-area laser fiber fabricated by halide-gas-phase-doping technique

Preparation of Er:YAG Crystal-Derived All-Glass Silica Fibers For a 1550-nm Single-Frequency Laser

Sub-kHz linewidth 1.6-μm single-frequency fiber laser based on a heavily erbium-doped silica fiber

Divalent Yb-Doped Silica Glass and Fiber with High Quantum Efficiency for White Light Source

Er3+/Yb3+ Co-Doped Fluorotellurite Glass Fiber with Broadband Luminescence

Efficient single-frequency Tm:YAG crystal-derived silica fiber laser at 1.7 μm

Yttrium Aluminosilicate (YAS) Fiber with Heavily Doped of Nd for Single Frequency Laser

The Preparation of Yttrium Aluminosilicate (YAS) Glass Fiber with Heavy Doping of Tm3+ from Polycrystalline YAG Ceramics

High quantum efficiency and high concentration erbium-doped silica glasses fabricated by sintering nanoporous glasses

Ultra-short Wavelength Operation in Thulium-doped Silica Fiber Laser with Bidirectional Pumping

Yb 3+ -Doped 200 Μm Diameter Core, Gain Guided Index-Antiguided Fiber

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification