Abstract:High-power, single-frequency lasers are important in the applications of coherent optical communication, Doppler wind lidar, and remote sensing. Here, a 10-kHz, 353-μJ, single-frequency, 574-ns, 1548-nm fiber laser system was demonstrated based on the optical pulse modulation. The 1548-nm, single-frequency seed laser with the linewidth of 1.25 kHz was modulated by two acousto-optic modulators (AOMs) into a 10-kHz pulsed laser. Two cascaded fiber amplifiers were spliced after the AOMs to scale up the pulse energy. The amplified spontaneous emission (ASE) was inhibited by the multistage amplification construction and the optical bandpass filters. A customized pulse profile was proposed to pre-compensate the temporal modulation and inhibit the stimulated Brillouin scattering (SBS) effect. The pulse duration of the amplified single-frequency pulse was 574 ns, with the peak power of 753 W. A numerical model was also built for investigating the dynamic of the interaction process inside the power amplifier. The simulated results indicate the maximum output power of the 10-kHz, customized single-frequency laser can be 3.984 W with a pulse duration of 381 ns.

208 W single-frequency 1064 nm laser based on a single-crystal fiber master-oscillator power amplifier

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

High-power single-frequency continuous-wave 355 nm UV laser via a frequency-correlated dual-wavelength laser

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

Watt-level all polarization-maintaining femtosecond fiber laser source at 1100 nm

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

A Review of the High-Power All-Solid-State Single-Frequency Continuous-Wave Laser

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

CW mode-locked fiber laser by improved all-polarization-maintaining figure-9 cavity at 1064 nm

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

20 Watt single-frequency 509 nm laser by single-pass second harmonic generation in an LBO crystal

175-W Continuous-Wave Master Oscillator Power Amplifier Structure Ytterbium-Doped All-Fiber Laser

Single-frequency pulsed fiber laser based on an electro-optic modulator with injection seeding technique

252 W core-pumped single-frequency all-fiber amplifier at 1064 nm

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High-energy single-frequency pulsed fiber MOPA at 1064 nm based on a hybrid active-fiber

180 Mj, Long-Pulse-duration, Master-Oscillator Power Amplifier with Linewidth Less Than 256 Khz for Laser Guide Stars

Robust single-frequency 589 nm fiber laser based on phase modulation and passive demodulation

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth