Abstract:We demonstrated remarkably enhanced 2.7 mu m emission in glass-ceramic (GC) fibers containing NaYF4: Er3+ nanocrystals with 980 nm excitation for the first time. The melt-in-tube technique is of scientific and technical significance for the fabrication of GC fibers in comparison to the conventional rod-in-tube technique. The obtained precursor fibers, in which the structure can be maintained well, exhibit no obvious element diffusion or crystallization during the fiber-drawing process. After a careful heat treatment, NaYF4 nanocrystals were controllably precipitated in the glass fiber core. Owing to the incorporation of Er3+ ions into the low phonon energy NaYF4 nanocrystals, enhanced 2.7 mu m emission was achieved from the Er3+-doped GC fibers, which was almost undetectable in precursor fibers due to the high phonon energy of the borosilicate glass fiber matrix. Moreover, the 2.7 mm emission lifetime was obtained due to the excellent emission properties of Er3+ in the GC fibers. The transmission loss values of precursor fibers and GC fibers at 1310 nm were measured to be 7.44 dB m(-1) and 11.81 dB m(-1), respectively. In addition, a theoretical simulation based on the rate equations and propagation equations was performed to evaluate the possibility of 2.7 mu m laser output. The excellent optical properties endow the GC fibers with potential applications for mid-infrared fiber lasers.

Enhanced single-mode fiber laser emission by nano-crystallization of oxyfluoride glass-ceramic cores

Precisely controllable fabrication of Er3+-doped glass ceramic fibers: novel mid-infrared fiber laser materials

Intense Continuous‐wave Laser and Mode‐locked Pulse Operation from Yb3+‐doped Oxyfluoride Glass–ceramic Fibers

Intense continuous‐wave laser and mode‐locked pulse operation from Yb 3+ ‐doped oxyfluoride glass–ceramic fibers

Enhanced CW Lasing and Q‐Switched Pulse Generation Enabled by Tm3+‐Doped Glass Ceramic Fibers

Novel Er3+/Ho3+‐codoped Glass‐ceramic Fibers for Broadband Tunable Mid‐infrared Fiber Lasers

Enhanced CW Lasing and Q‐Switched Pulse Generation Enabled by Tm 3+ ‐Doped Glass Ceramic Fibers

Microlaser Output from Rare‐Earth Ion‐Doped Nanocrystal‐in‐Glass Microcavities

Enhanced 2 m Mid-Infrared Laser Output from Tm<SUP>3+</SUP>-Activated Glass Ceramic Microcavities

Enhanced Upconversion Emission in Crystallization-Controllable Glass-Ceramic Fiber Containing Yb3+-Er3+ Codoped Caf2 Nanocrystals

Glass-ceramic Optical Fiber Containing Ba2TiSi2O8 Nanocrystals for Frequency Conversion of Lasers

Efficient and Broadband Emission in Dy3+-Doped Glass-Ceramic Fibers for Tunable Yellow Fiber Laser

Enhanced emission and spectroscopic properties in oxyfluoride glass ceramics containing LaOF:Er 3+ nanocrystals

Low-Temperature Fluoro-Borosilicate Glass for Controllable Nano-Crystallization in Glass Ceramic Fibers

~1 µm laser output based on heterogeneous fiber with Yb3+-doped fluorophosphate core and phosphate cladding

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Purification and single crystallization of glass‐cladding GaSb core fiber using 532 nm laser‐driven thermal gradients

Over 100 mW linearly polarized single-frequency fiber laser based on Er:YAG crystal-derived silica fiber

Fabrication and Characterization of Glass‐Ceramic Fiber‐Containing Cr3 + ‐doped ZnAl2O4 Nanocrystals

Realizing Superior Luminescence in Oxyfluoride Glass‐Ceramics by Enhancing Nano‐Micro Phase Separation

Ultrafast Fiber Laser at 0.9 Μm with a Gigahertz Fundamental Repetition Rate by a High Gain Nd3+-doped Phosphate Glass Fiber.