Abstract:Utilizing solid waste to produce foam material has become a significant direction in resource recycling. This study focuses solely on using silicomanganese slag and feldspar tailings as raw materials, utilizing a powder sintering process to produce autocatalytic foaming glass–ceramic foam. We formulated four mix ratios based on the compositional characteristics of the silicomanganese slag and feldspar tailings. The study then explored the evolution of phase formation and macroscopic pore morphology under varying preparation temperatures. Moreover, through multi-phase co-melting experiments, this work unveiled the high-temperature molten mass generation mechanism between silicomanganese slag and feldspar tailings. Our findings reveal that the glass melt generated from silicomanganese slag particles and the 'solid–liquid erosion behavior' of feldspar particles play pivotal roles in the formation of high-temperature co-melt substances. As the sintering temperature increases, the mixed powder exhibits three different states of high-temperature molten mass, which are the reasons for the evolution of the macroscopic pore structure. It is suggested that the addition of silicomanganese slag should be less than 50 %, and the heat treatment temperature should be below 1145 °C in preparing glass–ceramic foam with silicomanganese slag and feldspar tailings. The sample with 40 % silicomanganese slag and 60 % feldspar tailings, treated at 1140 °C, yielded glass–ceramic foam with a compressive strength of 1.68 MPa, apparent density of 0.279 g/cm 3 , porosity of 81.7 %, and thermal conductivity of 0.074 W·m −1 ·K −1 . In summary, this study provides a novel approach for the high-value utilization of silicomanganese slag and offers an economical route for developing lightweight, eco-friendly structural materials.

Preparation of Porous Composite Materials through Silicon Component Foaming and Special Heat Treatment

Preparation of Nanoporous Silicon and Study on Its Properties

A Facile Green Chemistry Route to Porous Silica Foams

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings

Preparation and Properties of Porous Silicon Carbide Ceramics Through Coat-Mix and Composite Additives Process

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Preparation of Porous Si2N2O/SiC Ceramics by Microwave Sintering

Preparation of Hierarchical Porous Silicon Carbide Monoliths via Ambient Pressure Drying Sol–Gel Process Followed by High-Temperature Pyrolysis

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

Facile Fabrication of Nanofibrous Network Reinforced Hierarchical Structured Porous Si3N4-based Ceramics Based on Si-Si3N4 Binary Particle-Stabilized Foams

High-temperature Post-Processing Treatment of Silica Nanofoams of Controlled Pore Sizes and Porosities

Recycling of Silicomanganese Slag and Fly Ash for Preparation of Environment-Friendly Foamed Ceramics

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Ultralight and Mechanically Robust SiC Foams with Interconnected Cellular Architecture

Preparation and Characterization of Porous SiC Ceramics by Oxidation Bonding Method

Highly Porous and Hierarchical MgAl2O4 Ceramics with Improved Pore Connectivity Prepared from Gelled Particle-Stabilized Foams

Microstructure Evolution Process of Porous Silicon Carbide Ceramics Prepared Through Coat-Mix Method

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

Preparation of Foamed Ceramics from Graphite Tailings Using A Self-Foaming Method

Preparation Of Porous Silicon Using Anodizing And Suppercritical Drying

Preparation of Core-Shell Silicon/Porous Carbon Powders