Abstract:Silica aerogels have attracted widespread attention for their distinct nanoporous networks, composed of interconnected silica nanoparticles and high-volume nanosized pores. Nonetheless, producing silica aerogels with low costs and simple processes still remains a considerable challenge. Herein, the mesoporous silica aerogels were prepared from inorganic silicon source through the freeze-drying. Using sodium silicate as the silica precursor, the gel was formed by the ion exchange and sol-gel in sequence. The regeneration of the weak acidic ion exchange resin produced the sodium acetate solution, which can be potentially used as carbon source for sewage treatment. To eliminate the collapse of microstructure of the silica hydrogel during freeze-drying, the tert-butanol aqueous solution was used as the freeze-drying medium. Particularly, the direct mixing of tert-butanol and silica sol to generate wet gel avoids prolonged and material-consuming solvent replacement. The pore structure of mesoporous silica aerogel can be adjusted by changing the concentration of tert-butanol solution. The 18 wt% tert-butanol solution results in the most favorable mesoporous structure of silica aerogel, owing to the eutectic behavior within the gel, which was verified by differential scanning calorimetry (DSC) analysis, and also due to the superior and uniform mesoporous structure of wet gel, which was validated by the cryogenic scanning electron microscopy (cryo-SEM) observation. Under optimal process conditions, the obtained silica aerogel exhibited a high porosity (97.74%) and typical mesoporous structure with the large pore volume (4.84 cm3·g-1) and an average pore diameter of 24.40 nm. The proposed cost-effective preparation strategy could elevate the potentials for large scale applications of silica aerogels in the fields of thermal insulation for building, industrial catalysis and adsorption, etc.

A Facile Green Chemistry Route to Porous Silica Foams

Continuous Production of Multifunctional Porous Materials Via Photo-Crosslinking of Ice Templated Emulsions

A Convenient and Versatile Strategy for the Functionalization of Silica Foams Using High Internal Phase Emulsion Templates As Microreactors.

Ultralight Silica Foams with a Hierarchical Pore Structure Via a Surfactant-Free High Internal Phase Emulsion Process

A novel fabrication method for glass foams with small pore size and controllable pore structure

Preparation of Porous Composite Materials through Silicon Component Foaming and Special Heat Treatment

3D Printable Ultra‐Highly Porous and Mechanically Strong Foam Materials for Multiple Applications

Reuse of mineral wool waste and recycled glass in ceramic foams

Highly Porous and Mechanically Robust Al2O3-based Foams with Self-Wrinkled and Rough Aperture Surfaces Via Binary Colloidal Self-Assembly of Nanoparticle/gelation Network

A novel approach for preparing glass ceramic foams from MSWI fly ash: foaming characteristics and hierarchical pore formation mechanism

Effect of phase evolution and pyroplastic formation behavior on glass-ceramic foam derived from silicomanganese slag and feldspar tailings

Facile Method for Preparing Hierarchical Al2O3-Glass Foam Ceramics with Superior Thermal Insulating Property.

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Lightweight and High-Strength Glass Foams Prepared by a Novel Green Spheres Hollowing Technique

Fumed Silica-Derived, Ambient Dried, and Low-Cost Nanoporous Aerogel-like Monoliths for Thermal Insulation

Silica Foams With Ultra-Large Specific Surface Area Structured By Hollow Mesoporous Silica Spheres

Ultralight and Mechanically Robust SiC Foams with Interconnected Cellular Architecture

A Facile Strategy for Freeze-Drying Preparation of Silica Aerogel from Sodium Silicate

Preparation of ultra-light ceramic foams from waste glass and fly ash

Self-catalyzed Gelling Synthesis of Aerogels with Inorganic and Organic Nanocomponents for Thermal Insulation and CO 2 Capture

Upcycling municipal solid wastes to self-foaming glass-ceramics by chemical additive-free and rapid low-temperature sintering