Abstract:A novel carbonaceous SiC/mullite composite aerogel is derived from catechol-formaldehyde/silica/alumina hybrid aerogel (CF/SiO2/AlOOH) via polymer-derived ceramics route (PDCR). The effects of the reactants concentrations on the physicochemical properties of the carbonaceous SiO2/Al2O3 aerogel and SiC/mullite aerogel are investigated. The mechanism of the textural and structural evolution for the novel carbonaceous SiC/mullite is further discussed based on the experimental results. Smaller reactants concentration is favorable to formation of mullite. Reactants concentration of 25% is selected as the optimal condition in considering of the mullite formation and bulk densities of the preceramic aerogels. Spherical large silica particles are also produced during heat treatment, and amorphous silica is remained after this reaction. With further heat treatment at 1400°C, silicon carbide and mullite coexist in the aerogel matrix. The mullite addition decreases the temperature of SiC formation, when compared with the conventional methods. However, after heat treatment at 1450°C, the amount of mullite begins to decrease due to the further reaction between carbon and mullite, forming more silicon carbide and alumina. The carbonaceous SiC/mullite can be transferred to SiC/mullite binary aerogel after carbon combustion under air atmosphere. The carbonaceous SiC/mullite has a composition of SiC (31%), mullite (19.1%), SiO2 (14.4%), and carbon (35%). It also possesses a 6.531nm average pore diameter, high surface area (69.61m2/g), and BJH desorption pore volume (0.1744cm3/g). The oxidation resistance of the carbonaceous SiC/mullite is improved for 85°C when compared with the carbon based aerogel.

Preparation and Characterization of SiO2/Carbon Foam and SIC/Carbon Foam Composites

Ultralight and Mechanically Robust SiC Foams with Interconnected Cellular Architecture

Fabrication of SiCN(O) Aerogel Composites with Low Thermal Conductivity by Wrapping Mesoporous Aerogel Structures over Mullite Fibers

Preparation and Characterization of C/Al 2 O 3 Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Preparation of the Novel B4C–SiC Composite Aerogel with High Compressive Strength and Low Thermal Conductivity

Effect of Alkaline Oxides (cao and MgO) on the Mechanical Properties of SiC-based Foam Ceramics

SiOC foam‐aerogel composites: Optimal balance of lightness and excellent thermal insulation

Carbon Foam-Reinforced Polyimide-Based Carbon Aerogel Composites Prepared via Co-Carbonization as Insulation Material

Preparation of foam ceramics from solid wastes: a study on the relationship between firing regime and properties by grey system theory

In-situ synthesis and textural evolution of the novel carbonaceous SiC/mullite aerogel via polymer-derived ceramics route

Preparation and Characterization of Phenolic Foam Modified with Nano-SiO_2

Microwave absorption and mechanical properties of SiCf/SiOC composites with SiO2 fillers

A novel porous carbon synthesized to serve in the preparation of highly dense and high-strength SiC/SiC by reactive melt infiltration

Preparation and characterization of lightweight SiC frameworks by connecting SiC fibers with SiC joints

Oxidation Resistance and Heat Transfer Simulation of MoSi2-based Coatings on Carbon Fiber Reinforced C-Al2O3 Aerogel Composite

Fabrication and characterization of SiC/Al composites prepared by laser powder bed fusion (LPBF) combined with vacuum pressure infiltration

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Evolution of the Novel C/SiO2/SiC Ternary Aerogel with High Specific Surface Area and Improved Oxidation Resistance

Preparation and Thermo-Mechanical Properties of Modified Gelatin Reinforced SiO2 Aerogels

Preparation of Porous Composite Materials through Silicon Component Foaming and Special Heat Treatment